Video driver thoughts

[Icky]

Do you know which is DIL and SIL though

I was going to ask that tomorrow.

Yep - I know which is which unfortunately

Finally desoldered the socket

[exxos]

Highlighted is STF side (header pins).

vd.jpg (68.34 KiB) Viewed 4067 times

[PhilC]

Thanks

[Icky]

Highlighted is STF side (header pins).

Thanks - Question is though which caps are which.

I can tell the C1 - 3 as they are big.

Don't know which is which in the kit. as I have 3 of one kind and 4 of the other

[PhilC]

The 3 caps in the white strip are the 3 which go around the IC as close to possible. The 4 caps on the clear strip, go on the outside pads of the IC, and the 4th is next to the shifter.

Hth

[Icky]

The 3 caps in the white strip are the 3 which go around the IC as close to possible. The 4 caps on the clear strip, go on the outside pads of the IC, and the 4th is next to the shifter.

Hth

Doh - I really am tired. Have been driving all day and I thought soldering would be a good wind down.

[exxos]

The 3 caps in the white strip are the 3 which go around the IC as close to possible. The 4 caps on the clear strip, go on the outside pads of the IC, and the 4th is next to the shifter.

Hth

Beat me to it!

[exxos]

Doh - I really am tired. Have been driving all day and I thought soldering would be a good wind down.

Hot coco then bed for you me thinks

[Icky]

Doh - I really am tired. Have been driving all day and I thought soldering would be a good wind down.

Hot coco then bed for you me thinks

Call me Mr McShaky Hands.

Got the board soldered it needs a clean up from all the flux but the harder I tried to keep a steady hand the worse it got.

Notice the small cap nearest the big ones and its wonky but has connectivity - I gave up on presentation skills.

IMG_3315.png (484.53 KiB) Viewed 4052 times

Now I'm going to get a hot coco Exxos.

Testing in the morning.

[exxos]

Presentation is optional on Alpha builds