Icky - Progress

[Icky]

Actual sockets marked up with pin 4 mono detect

EA550B19-A3CC-47EA-A02F-58B1D2F665A9.jpeg (593.59 KiB) Viewed 4098 times

3109020D-78E2-446F-9489-372D709C307B.jpeg (509.82 KiB) Viewed 4098 times

[PhilC]

Yeah just checked a socket myself and its as you expect, top row is back row of pins on pcb.

(just checking my board with a usb microscope i've just bought, found some dodgy socket pins but Rom was ok surprisingly)

[exxos]

Actual sockets marked up with pin 4 mono detect

Yeah, what I labeled on the PCB was actually right, but in the lib editor the pinout wasn't... see my previous post...

https://www.exxosforum.co.uk/forum/viewt ... =70#p10264

[Icky]

Actual sockets marked up with pin 4 mono detect

Yeah, what I labeled on the PCB was actually right, but in the lib editor the pinout wasn't... see my previous post...

Ah - yes.

We are posting so fast missed that one. Looking at the board its going to be quite a mess to patch. I have thought of desoldering the socket and using patch wires but the that means the socket is hanging in mid air.

So I am going to patch my cable and label it only for the STF Remake board so I don't plug it into an original.

[exxos]

Ah - yes.

We are posting so fast missed that one. Looking at the board its going to be quite a mess to patch. I have thought of desoldering the socket and using patch wires but the that means the socket is hanging in mid air.

So I am going to patch my cable and label it only for the STF Remake board so I don't plug it into an original.

Yeah cable patch is good for now..

Leave it with me, I will design a "un-fek board" to patch it.

[exxos]

Can you verify this is correct ? I assume what I have on the PCB is...

bb.jpg (57.09 KiB) Viewed 4080 times

[Icky]

Can you verify this is correct ? I assume what I have on the PCB is...

Let me give you a diagram of what the pinout on the board should be - I have drawn one already.

[exxos]

Let me give you a diagram of what the pinout on the board should be - I have drawn one already.

OK..

This should be correct pinout (on right)

666.jpg (112.09 KiB) Viewed 4069 times

[Icky]

Can you verify this is correct ? I assume what I have on the PCB is...

Let me give you a diagram of what the pinout on the board should be - I have drawn one already.

OK. This is what I have been using to help me decipher. Its based on me looking down onto the board and how you have your layout pics.

I am still building the cable to this

Screen Shot 2018-09-20 at 22.47.36.png (48.37 KiB) Viewed 4068 times

[PhilC]

Cool, well done guys.

A productive evening with fault finding.

Keep up the good work.