Project: HDMI/DVI out for STFM

[exxos]

I have one suggestions for this design (I'm not sure how final this design is). I dislike connectors directly soldered on board .....

The board you're referring to is designed to fit H5 series motherboards. There is a separate project in development for original machines which has the connector on a cable as you describe. There will be more threads on all this in due time.

[nokturnal]

That's great, I just saw earlier photos and I thought that this desing evolved in that way. On those newer motherboards, socket on pcb really makes sense.

[Icky]

As you know I have been working on the H4/5 version Phoenix Shifter but from that I have spun off an STFM version.

Phoenix_Shifter_2021-May-24_08-23-21AM-000_CustomizedView35659437561_png.png

Phoenix_Shifter_2021-May-24_08-22-52AM-000_CustomizedView43953547933_png.png

Phoenix_Shifter_2021-May-24_08-22-26AM-000_CustomizedView5065633021_png.png

As you can see there is now a ribbon cable that actually fits well under the video circuitry can hinges so you don't have to remove the lid and it will shut properly. Render below shows folded cable but it can go under the back hinges.

STFM Motherboard with routed Phoenix Shifter.png

The HDMI connector is on its own small board which allows fixing where is best for the user to get the port out of the case.

IMG_0309.png

IMG_0307.png

The boards are as small as I could get them. My goal was to try to fit it all in the foot print of the original shifter but I couldn't quite make it. I think its small enough though. Example of the two versions below H4/5 and STFM:

IMG_0356.jpeg

IMG_0355.jpeg

I am in the middle of building up these boards to test but you get the idea how these will work and how small they are.

IMG_0364.png

IMG_0365.png

[exxos]

Impressive work for sure :dualthumbup: :dualthumbup:

[sporniket]

great work :)

[stephen_usher]

That is impressive. Of course this would be useful for any traditional ST with a DIP Shifter, not just the STFM.

[Icky]

That is impressive. Of course this would be useful for any traditional ST with a DIP Shifter, not just the STFM.

Indeed. Any DIP shifter can be replaced. In fact I intend testing this board in my 520ST.

[JezC]

Looks really good @Icky

[alienkidmj12]

this is sure looking mighty good :)

[PaulJ]

Pretty cool Icky. Would like to put one in my Mega4. :dualthumbup: