Flashy Clock - Yet another DEV board

[PhilC]

Try this one...

FC4a.zip

Yep, that breaks it too. Want a job in the Destruction team?

[exxos]

Yep, that breaks it too. Want a job in the Destruction team?

Does this firmware work and you done the mods ?

https://www.exxosforum.co.uk/forum/viewt ... =40#p24339

You are also erasing the chip before programming ?

[PhilC]

Yes done the mods and yes erasing first. Will try again with the latest just in case.

[PhilC]

STill didn't boot with either 68000 or 68010. Screen stays at 60hz.

[exxos]

STill didn't boot with either 68000 or 68010. Screen stays at 60hz.

You mean the FC3A-1 firmware doesn't boot ? If that's the case, something is wrong somewhere as myself and Icky are using that version just fine.

[PhilC]

The FC3A-1 works fine, it's the two FC4 ones that don't.

[exxos]

The FC3A-1 works fine, it's the two FC4 ones that don't.

I will try and put my board back on to test it, but won't be until Monday now.

[PhilC]

No rush st all. It's you guys I'm here to help, not the other way round

When you are ready you are ready. For now, I will try and break it other ways, ie 68010, fitting IDE on top, Pak etc etc.

[exxos]

When you are ready you are ready. For now, I will try and break it other ways, ie 68010, fitting IDE on top, Pak etc etc.

Its a shame the 68010 doesn't run faster, not even 16MHz

[PhilC]

Never had one until today. I can always try one of your c1 5 boosters on it?