Icky - Progress

[exxos]

So looking at pin 12 on the monitor socket which should be VSYNC is going to the MONO_DETECT.

I have the feeling the socket is wired wrong.

hmmm, could be.. can you check on a real ST ?

[Icky]

hmmm, could be.. can you check on a real ST ?

Will do and I am going to create a patched start cable to swap those pins around to see if it works

[exxos]

It looks right, but I guess the numbering could still be wrong somewhere...

p1.JPG (30.79 KiB) Viewed 4326 times

p2.JPG (29.9 KiB) Viewed 4326 times

[exxos]

Will do and I am going to create a patched start cable to swap those pins around to see if it works

If one pins is wrong somehow, then others likely will be as well..

[Icky]

hmmm, could be.. can you check on a real ST ?

Will do and I am going to create a patched start cable to swap those pins around to see if it works

Yep just checked original ST and its the other way round for those two pins. They need to be swapped. I am going to check the other pins.

Will do a patch and send you the photos.

[PhilC]

This may explain my yellow screen, as the same cable works fine on both my Megas.

[exxos]

Yep just checked original ST and its the other way round for those two pins. They need to be swapped. I am going to check the other pins.

Will do a patch and send you the photos.

ah crap... well booo me, but yay as seems we are about to solve another problem.. question is, what went wrong with my pin numbering

[PhilC]

And can open up another line in the Exxos store.... Custom made STF monitor cables.

Icky, if you get a chance, can you please post a schematic for your working cable.

It might also be why my Ubeswitch doesn't work I guess?

[exxos]

And can open up another line in the Exxos store.... Custom made STF monitor cables.

I was just thinking that!

[exxos]

vv.jpg (68.63 KiB) Viewed 4308 times