Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

exxos blog - random goings on

Blogs & guides and tales of woo by forum members.
User avatar
TimNaber
Posts: 67
Joined: Fri Nov 01, 2019 3:20 pm

Re: exxos blog - random goings on

Post by TimNaber »

Is there a cable that has the ends you need ON BOTH ENDS?
ST: TT030 10/32m; Falcon 030 14m(2); MSTe 4m; MST 4m(3); MST 4m AdSpeed; 1040STf 4m(4); ST 4m(2); MF 44 w/SCSI2SD(3); MF 30(3); MF30 w/Drem

8-Bit: 320XE w/Ultraspeed+/FIXXL; 320XE; 130XE w/Ultimate 1m; 600XL w/Ultimate 1m; 800XL w/Omnimon XL/Boss XL/Omniview XL; 800 w/Incognito; 800 48K; Black Box Enhanced(3); 1050 Super Archiver II; 1050 Happy(2); XF551 360K(2); XF551 720K; HD Tower 480m
User avatar
exxos
Site Admin
Site Admin
Posts: 28785
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: exxos blog - random goings on

Post by exxos »

TimNaber wrote: Tue Nov 26, 2019 4:11 pm Is there a cable that has the ends you need ON BOTH ENDS?
Don't think so. Even those cables are getting a bit hard to find these days :(
User avatar
exxos
Site Admin
Site Admin
Posts: 28785
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: exxos blog - random goings on

Post by exxos »

Been on the hunt for replacement cartridge connectors.. These came this morning.. 2mm.. not right angle.. they almost fit as well :roll: problem is the connector doesn't have much "edge room" so the cards don't fit because they are basically 1 or 2mm to wide :(

IMG_4730.JPG
IMG_4730.JPG (254.47 KiB) Viewed 4493 times
EDIT:

They do actually seem to fit though with a bit of a shove.. hmm...
User avatar
exxos
Site Admin
Site Admin
Posts: 28785
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: exxos blog - random goings on

Post by exxos »

Finally got some built up.. need to re-test them all make sure they all still work before they go into stock.

IMG_4731.JPG
IMG_4731.JPG (160.62 KiB) Viewed 4479 times
User avatar
exxos
Site Admin
Site Admin
Posts: 28785
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: exxos blog - random goings on

Post by exxos »

Doing some UK 102/104 DUALTOS ROMs :)

1.jpg
1.jpg (202.1 KiB) Viewed 4445 times
User avatar
exxos
Site Admin
Site Admin
Posts: 28785
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: exxos blog - random goings on

Post by exxos »

Some pesky PeST's finally heading into stock...

IMG_4736.JPG
IMG_4736.JPG (76.48 KiB) Viewed 4422 times
User avatar
exxos
Site Admin
Site Admin
Posts: 28785
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: exxos blog - random goings on

Post by exxos »

These arrived today :)

IMG_4737.JPG
IMG_4737.JPG (95.07 KiB) Viewed 4402 times

Also busy packing up the alt-ram board prototypes and remaining pest cables to be sent off and built :)
User avatar
PhilC
Moderator
Moderator
Posts: 7548
Joined: Fri Mar 23, 2018 8:22 pm

Re: exxos blog - random goings on

Post by PhilC »

Those look familiar. Must remember to test mine, it's been fixed but since then I've been busy on the H4
If it ain't broke, test it to Destruction.
User avatar
ari.tao
Posts: 45
Joined: Tue Sep 18, 2018 8:50 am

Re: exxos blog - random goings on

Post by ari.tao »

exxos wrote: Sun Nov 17, 2019 1:28 am Thanks to Icky, we have a render on how this will look :)
So this board is no bigger than the 68K CPU. Also stackable without using much additional height. This board can be driven with any up coming items, mostly flashy-clock to start with. Then we will finally have some proper benchmarks in GB6 for alt-ram tests :)
ALT-RAM-min.png
Is there any more info about this?
Falcon, TT & some more
User avatar
exxos
Site Admin
Site Admin
Posts: 28785
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: exxos blog - random goings on

Post by exxos »

ari.tao wrote: Fri Dec 06, 2019 2:11 pm Is there any more info about this?
I just posted about it above.
Post Reply

Return to “MEMBER BLOGS”