LarryL’s blog - creating an ATX version of the Phoenix H5

[alexh]

Looks incredibubble. Looking forward to seeing the build log.

[LarryL]

Thanks for the good wishes, guys

Will take some time

Wait - ready!

IMG_0536.jpeg (1.23 MiB) Viewed 3817 times

Just kidding
Nothing soldered, yet
Just tested placements

Before I will solder anything, I have to do some extensive measurements
Esp. the ports and headers - my brain got twisted by the different pinouts during design phase…

[atari030]

Oh mama. That is awesome.

[exxos]

I remember those alpha days ,,@exxos, are you sure it was just the ports?

Might have been the odd thing here and there also

[LarryL]

Ok…
Did some measurements during last days
The only major fails are the two Mini-DIN for mouse and keyboard, where I have the wrong footprint.
The rest of the port pinouts seem to be OK
The rest is mostly cosmetic - although some jacks should really be moved a few millimeters to align better with PCB edge and with each other

So I will dare to start assembly.
Lots of SMT logic chips will come first - will be a task for the rainy Sunday
Then the THT - maybe not before the next weekend

Will keep you updated

Cheers
Michael

[LarryL]

WTF...
another wrong footprint

Video DAC should be PQFP44 with 10x10mm 0.8mm pitch - according to KiCAD library (all QFP44 have these dimensions in KiCAD)

But this beast is 14x14mm with 1mm pitch

...of course this was the last SMT chip I tried to solder to the prototype board (and not the first one)

That'll be fun while testing...

luckily I have a RGB2HDMI header
...or I will use 44 bodge wires

[HigashiJun]

No worries, it was almost a perfect try !

[LarryL]

No worries, it was almost a perfect try !

Let’s see …

I have read somewhere, that a PCB without some bodge wires is not existing in reality

[HigashiJun]

Let’s see …

I have read somewhere, that a PCB without some bodge wires is not existing in reality

Could be...

[exxos]

WTF...another wrong footprint Video DAC should be PQFP44 with 10x10mm 0.8mm pitch - according to KiCAD library (all QFP44 have these dimensions in KiCAD)

We all been there pretty much every lib in Eagle is wrong

I have read somewhere, that a PCB without some bodge wires is not existing in reality

First runs always need a bodge wire. If something is perfect first time, then it's witchcraft, and such a freak of nature, must be burnt at the stake !