H5 BUYERS INTERESTS

[davemacblack]

Hi, for me please 1 bare pcb and 1 smd preassembled H5 if possible.
Thanx

[JezC]

That makes 29 by my count. Now if @exxos will just add himself to the list, we're good to go.

We're over the initial 30 boards now, so has @exxos missed the cut?

Maybe we should see when we hit the 50 limit...

[Icky]

@wietze and @davemacblack I have added you to the list.

@Robson, @derkom, @officer960 and @kodak80 have added your updates.

@JezC - @exxos is an international man of mystery so I doubt he will appear on the list but still end up with several H5s

[exxos]

That makes 29 by my count. Now if @exxos will just add himself to the list, we're good to go.

Yeah aside from overworked @Icky hasn't finished the PCB yet will take some time to finish.

I can get any number of boards made.. While they get cheaper in higher quantities, the postage and import taxes go up. Its how I arrived at 30boards being a good minimum as setup charges are a factor as well. More boards may drive the price down a little though.

I think there is a limit for assembled boards of 30.. But bare PCBs there is no limit.

[derkom]

Yeah aside from overworked @Icky hasn't finished the PCB yet will take some time to finish.

I've got plenty of other broken or "yet to be broken" hardware to keep me busy for a long time. There is no rush.

[JezC]

I've got plenty of other broken or "yet to be broken" hardware to keep me busy for a long time. There is no rush.

Me too...in fact I'm really getting to the point where I need a working H4 to help test various parts when diagnosing the faults with other systems...

I'm sure the following will be familiar to most of you by now: my normally trusty 1040 STF from 1987 was acting up the other day - booted OK in vanilla state , but wouldn't boot with the Notator dongle plugged in
Put in another PSU & all worked just fine.

Luckily my Mega ST4 & Megafile booted OK to test the Avalon dongle (still need to run the program against it..probably over the weekend now).

[Robson]

@Icky thanks for the update but my update really was 2 x SMD assembled boards instead of the 1 bare, I won't need the bare anymore.

[exxos]

@Robson I've updated the list.

[weav]

Would like one bare board. Thanks!

[exxos]

Would like one bare board. Thanks!

Added!