Sales Thread (TF330 Bare Boards)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

User avatar
supaduper
Site sponsor
Site sponsor
Posts: 664
Joined: 08 Nov 2018 12:05

Re: Sales Thread (TF330 Bare Boards)

Post by supaduper »

I have 18 left but now that Gadget did a Youtube on a TF330 build there has been a little run so if you want one be quick as they will be gone
Smyckers
Posts: 8
Joined: 27 Aug 2019 21:13

Re: Sales Thread (TF330 Bare Boards)

Post by Smyckers »

Thanks all for the replies, I'll PM you supaduper.
terriblefire
Admin sponsor
Admin sponsor
Posts: 5686
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: Sales Thread (TF330 Bare Boards)

Post by terriblefire »

I've just ordered 50 rev 3 PCBs. I've ordered them in green due to the problems people have said they've had with cleaning the black boards.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
kludge
Posts: 400
Joined: 08 Nov 2018 14:05
Location: Sweden

Re: Sales Thread (TF330 Bare Boards)

Post by kludge »

terriblefire wrote: 29 Aug 2019 08:15 I've just ordered 50 rev 3 PCBs. I've ordered them in green due to the problems people have said they've had with cleaning the black boards.
I’m thinking about ordering some. The big question is when they’ll arrive. We have 25 % VAT and a ~£7 import fee on anything outside the EU. F-cking brexit.
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.

My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
terriblefire
Admin sponsor
Admin sponsor
Posts: 5686
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: Sales Thread (TF330 Bare Boards)

Post by terriblefire »

kludge wrote: 29 Aug 2019 11:15
terriblefire wrote: 29 Aug 2019 08:15 I've just ordered 50 rev 3 PCBs. I've ordered them in green due to the problems people have said they've had with cleaning the black boards.
I’m thinking about ordering some. The big question is when they’ll arrive. We have 25 % VAT and a ~£7 import fee on anything outside the EU. F-cking brexit.
I think we'll still be in the EU when they arrive.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
kludge
Posts: 400
Joined: 08 Nov 2018 14:05
Location: Sweden

Re: Sales Thread (TF330 Bare Boards)

Post by kludge »

Put me up for three then. Or do you want me to wait until they arrive?
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.

My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
alenppc
Moderator Team
Moderator Team
Posts: 934
Joined: 08 Nov 2018 12:59

Re: Sales Thread (TF330 Bare Boards)

Post by alenppc »

kludge wrote: 29 Aug 2019 11:15
terriblefire wrote: 29 Aug 2019 08:15 I've just ordered 50 rev 3 PCBs. I've ordered them in green due to the problems people have said they've had with cleaning the black boards.
I’m thinking about ordering some. The big question is when they’ll arrive. We have 25 % VAT and a ~£7 import fee on anything outside the EU. F-cking brexit.
Nothing that can't be avoided with an appropriate customs declaration.
User avatar
kludge
Posts: 400
Joined: 08 Nov 2018 14:05
Location: Sweden

Re: Sales Thread (TF330 Bare Boards)

Post by kludge »

alenppc wrote: 29 Aug 2019 16:38 Nothing that can't be avoided with an appropriate customs declaration.
Gifts are usually spared. But sometimes the Swedish postal service is full of surprises :)
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.

My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
alenppc
Moderator Team
Moderator Team
Posts: 934
Joined: 08 Nov 2018 12:59

Re: Sales Thread (TF330 Bare Boards)

Post by alenppc »

Mark everything as repair/return.

My usual problem is when the customs don't bother to read the label and slap a fee on it. I can fight it and usually I get a refund after a month or two, as annoying as the process is... but for everything I've shipped abroad, I have only had issues with the German customs who are a royal pain in the butt.
terriblefire
Admin sponsor
Admin sponsor
Posts: 5686
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: Sales Thread (TF330 Bare Boards)

Post by terriblefire »

I have just taken delivery of 50 TF330 boards... 25 left.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."

Return to “TF330”

Who is online

Users browsing this forum: ClaudeBot and 5 guests