I did start putting all pcbs in a drawer a while ago.. but these pcbs seem to have pre-dated that "move".. Guess I will look again..PhilC wrote: Thu Apr 18, 2019 7:50 pm You need a various pcb box. Icky probably has a label you could use once you've got one.
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
2600 Composite mod
Re: 2600 Composite mod
Re: 2600 Composite mod
Which is fair enough as it was over a year ago you got them.
If you reorder them, I'd be willing to contribute towards a couple of them?
If you reorder them, I'd be willing to contribute towards a couple of them?
If it ain't broke, test it to Destruction.
Re: 2600 Composite mod
Can do.. im still looking... I might have binned them in another clear out a few months agoPhilC wrote: Thu Apr 18, 2019 8:01 pm Which is fair enough as it was over a year ago you got them.
If you reorder them, I'd be willing to contribute towards a couple of them?
Re: 2600 Composite mod
Found these at the bottom of the "failed booster drawer" ...
- 1.jpg (87.4 KiB) Viewed 5103 times
Which has been reallocated to bin.
- IMG_4049.JPG (69.16 KiB) Viewed 5104 times
Re: 2600 Composite mod
LMAO, always where you least expect them 
If it ain't broke, test it to Destruction.
Re: 2600 Composite mod
I found these chips in "the pile" So must have been one of the chips I planned on using..
This one buffers and cleans up the Digital output from.. whatever the chip is called
FMS6146MTC14X
This one buffers and outputs Svideo
FMS6400
Though is hard to find other than "iffy" suppliers or sources..
This one buffers and cleans up the Digital output from.. whatever the chip is called
FMS6146MTC14X
This one buffers and outputs Svideo
FMS6400
Though is hard to find other than "iffy" suppliers or sources..
Re: 2600 Composite mod
Not much progress, but progress nonetheless....
- 1.jpg (42.31 KiB) Viewed 5052 times
-
rubber_jonnie
- Site Admin
- Posts: 15158
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: 2600 Composite mod
Right, that's it, I'm digging it out this weekend and finishing it!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: 2600 Composite mod
You better hurry, sent Phil a board yesterdayrubber_jonnie wrote: Thu Apr 25, 2019 7:35 pm Right, that's it, I'm digging it out this weekend and finishing it!
Can't find the second IC
- 2.jpg (40.24 KiB) Viewed 5045 times
Re: 2600 Composite mod
Don't worry RJ, I'd have broken it before you've built it.
(Thanks exxos btw)
(Thanks exxos btw)
If it ain't broke, test it to Destruction.