Atari + gotek + MAPROM floppy corruption

Other boosters or variants.
User avatar
exxos
Site Admin
Site Admin
Posts: 28613
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Atari + gotek + MAPROM floppy corruption

Post by exxos »

Ah there we go :thumbup: , running them twice from AUTO has made GB6 happy, it now finds and runs in alt-ram!

So here are the updated results..
IMG_5414.JPG
IMG_5414.JPG (102.77 KiB) Viewed 2219 times

I've dumped my .ST image here while its working :lol:

So it runs FASTRAM.PRG then TTRAMTOS from AUTO.. Resets... Loads again (but second run of TTRAMTOS doesn't load the IMG or causes reset now) then I have BLITFIX.PRG on AUTO in NEWDESK.INF.

:dizzy: :thanksyellow: :girldance:

YAART030.zip
(233.43 KiB) Downloaded 160 times
User avatar
exxos
Site Admin
Site Admin
Posts: 28613
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Atari + gotek + MAPROM floppy corruption

Post by exxos »

With caches off..

But with ROM access so fast, the scores should be wayyyy higher... :shrug:

IMG_5415.JPG
IMG_5415.JPG (106.91 KiB) Viewed 2215 times

This is my 32MHz booster, no alt-ram.. So the 030 should be more like double all those scores at 50Mhz.

ste32mhz.jpg
ste32mhz.jpg (149.69 KiB) Viewed 2214 times
User avatar
agranlund
Site sponsor
Site sponsor
Posts: 1763
Joined: Sun Aug 18, 2019 10:43 pm
Location: Sweden
Contact:

Re: Atari + gotek + MAPROM floppy corruption

Post by agranlund »

This is my 534.
Granted, it's comparing against a stock ST because that's where I started and I'm interested in my score against that.
It's also running NVDI. I'll try without NVDI tomorrow and see what that shows.
I think this is EmuTOS. TOS206 is slightly faster at some tests and slightly slower at others but average is >1000% on both :)


TOS is doing a lot of ST-RAM access drawing so NVDI and fastram is a very good match.
And in your case without maprom all of TOS internal variables are in ST-RAM as well which isn't going to help.

Edit: I am curious about some of these faster results on the 32Mhz booster though, is the ST bus also boosted or is it still running at 8Mhz?
Screenshot 2020-07-17 at 00.27.13.png
Screenshot 2020-07-17 at 00.27.13.png (664.31 KiB) Viewed 2207 times
Post Reply

Return to “EVERYTHING ELSE”