Module ESP8266 without TF on Amiga

[terriblefire]

set bitrate 38400
save
reset

[kulamario]

I waiting maybe few minutes with
CMD>reset
Then I get info
Connection closed by foreign host.
So I write agin

Code: Select all

telnet 192.168.240.1 7777

Then

Code: Select all

set bitrate 38400

Code: Select all

save

Code: Select all

reset

After reset is still freeze CMD>reset

20200417_171554.jpg (267.04 KiB) Viewed 5216 times

[terriblefire]

I waiting maybe few minutes with
CMD>reset
Then I get info
Connection closed by foreign host.
So I write agin

Code: Select all

telnet 192.168.240.1 7777

Then

Code: Select all

set bitrate 38400

Code: Select all

save

Code: Select all

reset

After reset is still freeze CMD>reset

You are all set. Plug it into the amiga and use my script.

[kulamario]

This script how to start ?
Just double click and then enter , enter ... ?

[terriblefire]

This script how to start ?
Just double click and then enter , enter ... ?

type execute install_script

Check that the version is the one with the baud rate of 38400.. the one i posted on this forum has that baud rate.

[theq]

Just power off and on the ESP after reset. Should make it work.

[kulamario]

How to check this ?

Check that the version is the one with the baud rate of 38400.. 

I disconnect esp8266 from laptop and connect to amiga
Install your script

I try to open site in AmiiFTP and nothing happened
How should be Led on esp8266?
My just light up for 2sec and then turn off

20200417_173142.jpg (231.38 KiB) Viewed 5207 times

20200417_172845.jpg (296.53 KiB) Viewed 5207 times

[terriblefire]

How to check this ?

Check that the version is the one with the baud rate of 38400.. 

I disconnect esp8266 from laptop and connect to amiga
Install your script

I try to open site in AmiiFTP and nothing happened
How should be Led on esp8266?
My just light up for 2sec and then turn off

start with ping 192.168.240.1 at a cli after a reboot.

[kulamario]

No working

20200417_180204.jpg (276.89 KiB) Viewed 5204 times

[terriblefire]

No working

Have you tested your hardware?