Be time to post a benchmark before ya know it
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
PhilC's H4 Mongrel edition build x 3
Re: PhilC's H4 Mongrel edition build x 3
getting a desoldered one to fit in. its in there now tho.
Be time to post a benchmark before ya know it
Be time to post a benchmark before ya know it
If it ain't broke, test it to Destruction.
Re: PhilC's H4 Mongrel edition build x 3
Yes lots of pins to get in.PhilC wrote: Wed Nov 27, 2019 6:13 pm getting a desoldered one to fit in. its in there now tho.
Be time to post a benchmark before ya know it
What about a pic on progress
Re: PhilC's H4 Mongrel edition build x 3
Oh, ok then.
- 20191127_191710.jpg (336.85 KiB) Viewed 3411 times
If it ain't broke, test it to Destruction.
-
rubber_jonnie
- Site Admin
- Posts: 15087
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: PhilC's H4 Mongrel edition build x 3
Hey, no fair!PaulJ wrote: Wed Nov 27, 2019 3:25 pmThank God RJ doesn't have that distraction. We would have to take him to the emergency room after a run in with his soldering iron.PhilC wrote: Wed Nov 27, 2019 3:16 pm
20190916_215147.jpg
About a month ago but this happens often. Makes it difficult to reach the soldering iron.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: PhilC's H4 Mongrel edition build x 3
Sweet! Quad core!
Re: PhilC's H4 Mongrel edition build x 3
@PhilC - nice pic. I see you have gone for the VGA adaptor so will be the tester for the MONO/RGB switch
I think @derkom and I have gone for the standard ST monitor connector.
I think @derkom and I have gone for the standard ST monitor connector.
Re: PhilC's H4 Mongrel edition build x 3
Icky wrote: Wed Nov 27, 2019 8:02 pm @PhilC - nice pic. I see you have gone for the VGA adaptor so will be the tester for the MONO/RGB switch
I think @derkom and I have gone for the standard ST monitor connector.
Should be simple enough.
If it ain't broke, test it to Destruction.
Re: PhilC's H4 Mongrel edition build x 3
Quad core hell, that's a penta-core!!!
Re: PhilC's H4 Mongrel edition build x 3
Well spotted @PaulJ , did you spot the 68010 thrown in for good measure?
If it ain't broke, test it to Destruction.