A5000 - diving in at the deep end!

[HigashiJun]

@rubber_jonnie

Yes, but you're getting closer to your goal.

[rubber_jonnie]

@rubber_jonnie

Yes, but you're getting closer to your goal.

Definitely

[rubber_jonnie]

In the meantime, whilst I tinker with LanMan98 I have set the machine up with a nice desktop and now have the Zip drive software and LanMan98 running at boot time.

PXL_20231121_105407985.jpg (283.77 KiB) Viewed 931 times

I'm considering removing the Econet module, since it is never going to see any use (Unless I go mad and decide to network my BBC to the A5000 ), and that should then remove the network config panel from the menu bar, giving it a bit more room so it doesn't slide left and right due to too many icons.

[HigashiJun]

Nice !

[rubber_jonnie]

Nice !

Thanks

I have just pulled the lid off and removed the econet card, so that is no longer loading the econet software, and I backed up the SD card and BlueSCSI image files while I was there.

I also added a 2nd 1GB BlueSCSI dive file, so I now have a total of 2GB storage over 2 disks and 4 partitions

[alexh]

You could try to turn on smb1 and disable smb2, smb3 on a Windows10 computer if that helps?

https://learn.microsoft.com/en-us/windo ... abs=server

[rubber_jonnie]

You could try to turn on smb1 and disable smb2, smb3 on a Windows10 computer if that helps?

https://learn.microsoft.com/en-us/windo ... abs=server

I've dug out a Win 7 machine to test it out, but in the office today so it won't be happening for a while

[rubber_jonnie]

As a side note, I was able to get all the necessary components installed to run SMB server. Sadly I didn't have enough memory to run it, so onwards with the Windows 7 shares...

[rubber_jonnie]

You could try to turn on smb1 and disable smb2, smb3 on a Windows10 computer if that helps?

https://learn.microsoft.com/en-us/windo ... abs=server

I just checked and I have SMB1 enabled on my Windows Server 2016 as it goes. Going to build a Win7 VM and follow the exact instructions for setting up a share.

[HigashiJun]

Keep us informed.