Module ESP8266 without TF on Amiga

[matt020]

For Windows, use software "NodeMCU" to flash the ESP8266
There are videos on YouTube on how to do it.

That will flash the ESP, but now you need to telnet in on port 7777 to the ESP8266 to set wifi SSID and wifi password to suit your network. I haven't received my ESP8266 so I haven't got that far yet......

[terriblefire]

That will flash the ESP, but now you need to telnet in on port 7777 to the ESP8266 to set wifi SSID and wifi password to suit your network. I haven't received my ESP8266 so I haven't got that far yet......

There doesnt appear to be a way to slattach via windows. At least that i know of .

[kulamario]

I download Ubuntu
Can I do everything from usb stick or I must install Ubuntu?
What I should to do next ?
Please help me
Like I said I never use linux

20200417_104146.jpg

[terriblefire]

I download Ubuntu
Can I do everything from usb stick or I must install Ubuntu?
What I should to do next ?
Please help me
Like I said I never use linux

try ...

Code: Select all

sudo slattach

if not installed try

Code: Select all

sudo apt-get update
sudo apt-get install net-tools
sudo slattach

Plug the esp with the firmware into a usb port...

Code: Select all

sudo dmesg

it will list towards the end which is the name of the serial port. it will be like /dev/ttyUSB0 etc.

then follow the guide.

[kulamario]

I get some error

20200417_141646.jpg

[terriblefire]

I get some error

Do what it says then.

[kulamario]

I found solution
Just write

Code: Select all

sudo dpkg --configure -a

I install all of this

Code: Select all

sudo apt-get update

Code: Select all

sudo apt-get install net-tools

Code: Select all

sudo sudo dmesg

Then start do this

Code: Select all

sudo slattach -L -p slip -s 115200 /dev/ttyUSB0&

And after this

Code: Select all

sudo ifconfig sl0 192.168.240.2 pointopoint 192.168.240.1 up mtu 1500

is some error like on picture

20200417_161225.jpg

[terriblefire]

let me google...

type sudo ifconfig -a

[dalek]

You wrote s10 not sl0.

Letter 'l' not number '1'. sl0 stands for 'slip interface 0'

[kulamario]

Ok done but dnt know what is going on
After CMD>reset
Nothing happened just start blink LED on esp8266 few times
And now blink every maybe 2-3 minutes
In terminal is still like on picture

20200417_164710.jpg

I check on my router what devices is connect
I have ESP_07CF0D_Wireless

What I should to do next ?