If anyone wants a project..

Post by **terriblefire** » 10 Apr 2020 17:02

exxos wrote: 10 Apr 2020 16:29
The CPU max about 64mhz but likely be 50mhz for normal usage. Anything above 50MHz is down to "overclocking" and I doubt people will get much past 64MHz there.

Edit.
https://www.exxosforum.co.uk/forum/viewt ... 510#p32482. Couldn't get past 75mhz, needed freezer spray at that point :lol:

OK i'll put a 120Mhz crystal on there and be a sneaky SOB.

Post by **Icky** » 11 Apr 2020 12:46

In regards to the original 16MB find from @exxos we could test it out with a modified Three Amigos board on the H4 as pointed out the H4 has a SIMM already and waiting for a MAD10 line.

I just threw a PLD in between the GLUE Socket and Connector to get the MAD10 line out with a few other IO's for testing as well.

Screenshot 2020-04-11 at 12.44.19.png

Post by **PhilC** » 11 Apr 2020 13:27

So this will give us 14mb then?

Post by **exxos** » 11 Apr 2020 13:28

PhilC wrote: 11 Apr 2020 13:27 So this will give us 14mb then?

In theory yes. Doubt it be that simple though.

Post by **terriblefire** » 07 May 2020 09:34

I dropped the ram board before i got sick i'll pick up again.

Post by **exxos** » 07 May 2020 11:01

terriblefire wrote: 07 May 2020 09:34 I dropped the ram board before i got sick i'll pick up again.

:thumbup:

exxos's Atari, Amiga & retro forum

If anyone wants a project..

Re: If anyone wants a project..

Re: If anyone wants a project..

Re: If anyone wants a project..

Re: If anyone wants a project..

Re: If anyone wants a project..

Re: If anyone wants a project..

Who is online