TF CD32 Riser Revision 2 Design Complete

[terriblefire]

Possibly either. But seems to be isolated to the built board.

I’m concerned If these F7xx are this fragile they aren’t fit to be used in anger.

EDIT: not PSU as I’ve powered it all up with a monster accurate power supply and still get the same response.

[terriblefire]

Got it.. needed to set these settings in ST Link Utility

settings.JPG

[arkadiusz.makarenko]

Got it.. needed to set these settings in ST Link Utility

settings.JPG

This is far beyond me pay grade.

[arkadiusz.makarenko]

@terriblefire
May I ask if there are any issues with this board?

[terriblefire]

@terriblefire
May I ask if there are any issues with this board?

I've not been well enough to look at the board for the last 4-5 days and i've had to catch up at work.

I've posted you a board. there are three resistors you need to solder on before you put the DB23 on. i'll give you details later.

[arkadiusz.makarenko]

@terriblefire
May I ask if there are any issues with this board?

I've not been well enough to look at the board for the last 4-5 days and i've had to catch up at work.

I've posted you a board. there are three resistors you need to solder on before you put the DB23 on. i'll give you details later.

Thank you.

I was worried that you gave up a little on it because of issues with arm.

[terriblefire]

No this is my most wanted project right now.

[arkadiusz.makarenko]

No this is my most wanted project right now.

What would be high level goals for stm32 except HID. Flashfloppy port?

[terriblefire]

What would be high level goals for stm32 except HID. Flashfloppy port?

wireless 2 x Joypad and a keyboard mouse combo. Thats all i really want.

[arkadiusz.makarenko]

Got it.. needed to set these settings in ST Link Utility

settings.JPG

... weird I had those set up like this by default.