Icky's H4 Mongrel edition build x 2

[DoG]

...I will be using it on my boards if they ever show up.

I haven't got my board either yet so we can be sad together

[PaulJ]

...I will be using it on my boards if they ever show up.

I haven't got my board either yet so we can be sad together

I believe kodak80 is in AU so I'd guess he could join the club..

[kodak80]

Yes, waiting for delivery and will be joining the club once the boards arrive.

[Icky]

Whilst building the H4 I wanted to see how the SIMM slot played nicely with a keyboard. Placing the H4 board pin an STE base (only one I had to hand) and placing the keyboard in position shows there is plenty of room to spare. Good placement @exxos

IMG_4587.jpeg (57.58 KiB) Viewed 4117 times

[exxos]

@Icky yeah loads of room . we about due for something pink

[PhilC]

I was wondering if one of the angled simm sockets that ige got would fit if I used a narrow simm, looks like it might

[Icky]

@Icky yeah loads of room . we about due for something pink

About 3-4 weeks and I should be able to. Will order in some pink ABS for a Christmas trial

[Icky]

I was wondering if one of the angled simm sockets that ige got would fit if I used a narrow simm, looks like it might

It might be tight PhilC. I would test it out before soldering in that SIMM slot.

[Icky]

@exxos your dimensions on the board were bang on

The board fits perfectly in the bottom shielding. It clips in at the back and drops snuggly (not too tight but tight enough to stay in) into the recesses at the front and sides.

IMG_4599.jpeg (514.5 KiB) Viewed 4057 times

[exxos]

@exxos your dimensions on the board were bang on
The board fits perfectly in the bottom shielding. It clips in at the back and drops snuggly (not too tight but tight enough to stay in) into the recesses at the front and sides.

Cool I will probably find something wrong with it at some point

Not sure if anyone noticed the missing tin plating on the bottom yet