REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TF1260 stuff
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1260 stuff
TF1260 is only for A1200. If I could detect an ACA500 And make the thing self destruct I would.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
E-Penguin
- Posts: 12
- Joined: 09 Jul 2019 13:43
Re: TF1260 stuff
Alrighty then, good job you couldn't detect it!
Don't worry, the tf1260 will lead a long and happy life in one of my A1200s
Don't worry, the tf1260 will lead a long and happy life in one of my A1200s
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1260 stuff
Entirely because supporting stuff like that is a nightmare
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
GadgetUK164
- Posts: 445
- Joined: 04 Jan 2019 14:26
Re: TF1260 stuff
Stephen said I was OK to post this:-
With the latest firmware, IDE is showing 5.3MB/s (up from 1.9MB), and bus test is showing at least 100% improvement I think too!!! Runs way way better =O
I would be interested to know (once people get onto a later firmware) what speed you get on IDE, and what card / adapter / drive you use! I suspect the CF card I am using could be better.
With the latest firmware, IDE is showing 5.3MB/s (up from 1.9MB), and bus test is showing at least 100% improvement I think too!!! Runs way way better =O
I would be interested to know (once people get onto a later firmware) what speed you get on IDE, and what card / adapter / drive you use! I suspect the CF card I am using could be better.
You do not have the required permissions to view the files attached to this post.
My YouTube Channel - www.youtube.com/GadgetUK164
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1260 stuff
I need to improve chip ram a bit.. but the rest is there or thereabouts.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Higgy
- Posts: 489
- Joined: 23 Apr 2019 20:05
- Location: Somerset
Re: TF1260 stuff
Nice!
I ordered a XILINX DLC9 programmer in preparation for the remote update (I know this method has not been confirmed) but I was sent an incompatible JTAG SMT2 one instead.
Least I have been refunded, but annoying nonetheless.
I ordered a XILINX DLC9 programmer in preparation for the remote update (I know this method has not been confirmed) but I was sent an incompatible JTAG SMT2 one instead.
Least I have been refunded, but annoying nonetheless.
-
Duncan
- Posts: 27
- Joined: 07 Jun 2021 22:37
- Location: Glasgow UK
Re: TF1260 stuff
looks minted :)
canny wait to try it.
What do i need to flash the firmware, something like the Altera USB blaster for the Vampire? or can someone do it for me? :)
canny wait to try it.
What do i need to flash the firmware, something like the Altera USB blaster for the Vampire? or can someone do it for me? :)
"I've seen things you people wouldn't ken, I've seen motors on fire, on the shoulder near Kinryan, I have watched vejazels glitter in the dark, at the black Trongate, awe these moments, will be lost in time, like beers ... when I'm hame. Time to fry"
-
trixster
- Posts: 115
- Joined: 22 Mar 2019 15:25
-
matt020
- Posts: 326
- Joined: 29 Sep 2019 09:17
- Location: West Australia
Re: TF1260 stuff
GadgetUK164 wrote: 23 Jun 2021 15:33
With the latest firmware, IDE is showing 5.3MB/s (up from 1.9MB)
Is that A1200 motherboard IDE speed, or TF1260 IDE speed?
Who is online
Users browsing this forum: ClaudeBot and 3 guests