No floating pins please
And a 5V IDE LED connector would be perfect.
And yes, this card is a winner!
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Limited TF536 Run - Sort of Sales (All gone)
Moderators: terriblefire, Terriblefire Moderator
Re: Limited TF536 Run - Sort of Sales (All gone)
And a 5V IDE LED connector would be perfect.
And yes, this card is a winner!
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
No to the LED but i'll sort the floats.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Limited TF536 Run - Sort of Sales (All gone)
My board arrived today and soldered it up. Hopefully I can test it tomorrow!
Has anyone tested it in a 2000? I have rev 5/6/8 A500's and rev 4.3/6.x 2000's to test. Not sure how many of those I can get to this weekend though.
Has anyone tested it in a 2000? I have rev 5/6/8 A500's and rev 4.3/6.x 2000's to test. Not sure how many of those I can get to this weekend though.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
I developed it in the CDTV and A2000. A500 was an afterthought.dalek wrote: Fri Jan 31, 2020 12:26 pm My board arrived today and soldered it up. Hopefully I can test it tomorrow!
Has anyone tested it in a 2000? I have rev 5/6/8 A500's and rev 4.3/6.x 2000's to test. Not sure how many of those I can get to this weekend though.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Limited TF536 Run - Sort of Sales (All gone)
You removed the CDTV patches in the latest test firmware and while this one made the board work for me, will it still work on the CDTV? Just curious.terriblefire wrote: Fri Jan 31, 2020 12:27 pmI developed it in the CDTV and A2000. A500 was an afterthought.dalek wrote: Fri Jan 31, 2020 12:26 pm My board arrived today and soldered it up. Hopefully I can test it tomorrow!
Has anyone tested it in a 2000? I have rev 5/6/8 A500's and rev 4.3/6.x 2000's to test. Not sure how many of those I can get to this weekend though.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
Will boot but the CD will not work.alenppc wrote: Fri Jan 31, 2020 12:49 pmYou removed the CDTV patches in the latest test firmware and while this one made the board work for me, will it still work on the CDTV? Just curious.terriblefire wrote: Fri Jan 31, 2020 12:27 pm
I developed it in the CDTV and A2000. A500 was an afterthought.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Limited TF536 Run - Sort of Sales (All gone)
In and working on my rev 6A A500 no real issues. Further testing tomorrow
My CPLD does get quite hot though - haven't tried any other firmware than 'full phase 7' yet.
IDE 1.5MB/s with 'cpu fastrom' - haven't tried mufastrom yet.
My CPLD does get quite hot though - haven't tried any other firmware than 'full phase 7' yet.
IDE 1.5MB/s with 'cpu fastrom' - haven't tried mufastrom yet.
- IMG20200201222200.jpg (197.05 KiB) Viewed 4130 times
Re: Limited TF536 Run - Sort of Sales (All gone)
About CDTV situation. How it will perform with patches? I think that I read somewhere that CD works, but internal SCSI controller doesn`'t?
If CD works that would be enough, internat SCSI is slow compared to any IDE controller.
If CD works that would be enough, internat SCSI is slow compared to any IDE controller.
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1371
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: Limited TF536 Run - Sort of Sales (All gone)
You could try initial firmware?utri007 wrote: Sat Feb 01, 2020 1:50 pm About CDTV situation. How it will perform with patches? I think that I read somewhere that CD works, but internal SCSI controller doesn`'t?
If CD works that would be enough, internat SCSI is slow compared to any IDE controller.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
Re: Limited TF536 Run - Sort of Sales (All gone)
Tested TF536 okay in A500 R6, R8A and A2000 R6. Not sure if I'll find the A2000 R4 anytime soon. Only tested SD cards not CF.
Strangely with mufastrom my IDE speed is 2.6MB/sec which is less than others seem to be reporting. I did think I had a 2mm 44pin IDE header but I only had a female one, so had to stuff some pin headers in there to get the cable to attach - could be noise from the extra connections?
Oh, and CPLD gets hot in all three systems - so I guess normal?
Strangely with mufastrom my IDE speed is 2.6MB/sec which is less than others seem to be reporting. I did think I had a 2mm 44pin IDE header but I only had a female one, so had to stuff some pin headers in there to get the cable to attach - could be noise from the extra connections?
Oh, and CPLD gets hot in all three systems - so I guess normal?