TF1230 Beta Interest (Open Source)

[chucky]

ROMs doesn't work. apparenlty it is not a pirate

[terriblefire]

Pretty sure I found whats causing the crashes..

WhatsApp Image 2021-09-03 at 08.38.30.jpeg (59.41 KiB) Viewed 3621 times

[8 Bit Dreams]

Hmm... that are great news!
But may I ask why 66MB are shown? Shouldn't it be 128MB?

[terriblefire]

Hmm... that are great news!
But may I ask why 66MB are shown? Shouldn't it be 128MB?

My boards are 64

[GadgetUK164]

With the latest firmware - boots fine on my 2B! Just doing a full memory test but seems fine! Booted from HDD without issue, runs games and utils etc.
I did notice performance isn't what I would expect of 50Mhz though. Benchmarks coming back about 20 - 25% slower than a 536 @ 50Mhz. Now that could be because I have an 060 HDD build here and everything setup for that. Maybe that's the issue there, or perhaps because its the beta firmware - I am using the one dated 01/09/2021.

Fantastic though - great to see it working on my 2B!!!! I just wish I had a 1D4 to test with =/
NOTE: MEGA thanks to supaduper for the components to build this today!!!!!!!!!!!! =D

20210903_163650sm.jpg (87.05 KiB) Viewed 3515 times

Memory test passed btw - working solid here on 2B!

[8 Bit Dreams]

My boards are 64

Yeah, I know...was just a joke..
btw, there is a possibility to implement auto detect code for RAM, this would make life much easier, since only one FW would be needed no matter what amount of ram is installed

[Danoo]

I did notice performance isn't what I would expect of 50Mhz though. Benchmarks coming back about 20 - 25% slower than a 536 @ 50Mhz. Now that could be because I have an 060 HDD build here and everything setup for that. Maybe that's the issue there, or perhaps because its the beta firmware - I am using the one dated 01/09/2021.

I am pretty sure I read in an earlier post that burst mode has not been implemented yet so it will probably turn into a red race car later on in the design process

Nice build BTW

[terriblefire]

My boards are 64

Yeah, I know...was just a joke..
btw, there is a possibility to implement auto detect code for RAM, this would make life much easier, since only one FW would be needed no matter what amount of ram is installed

The OS auto detect code is rubbish. But I’m planning to remove autoconfig completely and put the ram
At 08000000. So same as TF1260

[kulamario]

Yeah, I know...was just a joke..
btw, there is a possibility to implement auto detect code for RAM, this would make life much easier, since only one FW would be needed no matter what amount of ram is installed

The OS auto detect code is rubbish. But I’m planning to remove autoconfig completely and put the ram
At 08000000. So same as TF1260

This what I understand pcmcia I'll by working when you do this like in TF1260?

[terriblefire]

Should be working already?