Two Falcon 030's Rev B & Rev D/C

Problems with your machine in general.
User avatar
Cyprian
Posts: 571
Joined: Fri Dec 22, 2017 9:16 am
Location: Warszawa, Poland
Contact:

Re: Two Falcon 030's Rev B & Rev D/C

Post by Cyprian »

Rustynutt wrote: Mon Jul 31, 2023 1:45 am Probably discussed long ago.
What happened to the files required to produce the motherboard?
Know CLAB went out on a whim really.
And the injection molds requires to make cases? Was that all left behind in Taiwan?
would be cool to buy a new Falcon motherboard, all needed chipsets are available on the Ebay

Regarding molds and files required to produce the Falcon motherboard, it is puzzling that despite the passage of 30 years, they have still not been found...
Atari: V4sa TT030 Falcon030 Mega ST Mega STe 1040 STe 520 STm 800XL 65XE Jaguar Lynx I/II 7800 Portfolio / VME: ATW800/2 Mach64 Mach32 ET4000 CrazyDots PAMNet / SM146 SC1435 SM124 / Antonia2 ATSpeedC16 TF536 PAK68/3
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
Rustynutt
Posts: 230
Joined: Fri Sep 29, 2017 8:24 am
Location: USA

Re: Two Falcon 030's Rev B & Rev D/C

Post by Rustynutt »

Steve wrote: Sat Jul 22, 2023 9:40 am @Rustynutt I thought all Falcons had the same crystal codec? I've worked on a lot of different Falcons, including Clab, and they have been the same as far as I remember.

edit: I did read once that Clab carefully 'selected' better performing crystal codecs than the usual. But I always just thought this was marketing drivel.
Here's an early board I have.

KIMG1390~2.jpg
KIMG1390~2.jpg (369.32 KiB) Viewed 1249 times
KIMG1389~2.jpg
KIMG1389~2.jpg (243.36 KiB) Viewed 1249 times
Steve
Moderator
Moderator
Posts: 3415
Joined: Fri Sep 15, 2017 11:49 am

Re: Two Falcon 030's Rev B & Rev D/C

Post by Steve »

Oh wow, I've never seen a Falcon motherboard with a different audio codec chip like this before.
Rustynutt
Posts: 230
Joined: Fri Sep 29, 2017 8:24 am
Location: USA

Re: Two Falcon 030's Rev B & Rev D/C

Post by Rustynutt »

It turns out decoding the serial number, this unit according to the schematics is a "pilot production" unit, #23.
Have another built Oct of 92, it has the Crystal CODEC socketed. #100.

KIMG1392~2.jpg
KIMG1392~2.jpg (315.35 KiB) Viewed 1211 times
mikro
Posts: 866
Joined: Mon Aug 28, 2017 11:22 pm
Location: Kosice, Slovakia
Contact:

Re: Two Falcon 030's Rev B & Rev D/C

Post by mikro »

@Steve had no. 12 not so long ago: viewtopic.php?f=59&t=4235
Rustynutt
Posts: 230
Joined: Fri Sep 29, 2017 8:24 am
Location: USA

Re: Two Falcon 030's Rev B & Rev D/C

Post by Rustynutt »

Must be older, a green wire is used for the CPU patch, mine is black! :lol:
User avatar
kohli79
Site sponsor
Site sponsor
Posts: 141
Joined: Fri Feb 05, 2021 8:23 pm
Location: Saxony Anhalt, Germany

Re: Two Falcon 030's Rev B & Rev D/C

Post by kohli79 »

Here are two pictures of my C-Lab MK 1 which I bought at the end of May this year.

1000043281.jpg
1000043281.jpg (371.72 KiB) Viewed 1108 times
1000043282.jpg
1000043282.jpg (373.79 KiB) Viewed 1108 times
Life is too short not to have an Amiga/Atari. 8-)
Post Reply

Return to “HARDWARE ISSUES”