Logic analyser recommendations ?

[exxos]

Its protocol has been reversed and is supported by Sigrok it seems
https://sigrok.org/wiki/Sysclk_LWLA1034

Great thanks. I'll give it a go.

[exxos]

Started out as well as every other piece of software out there does .

Capture.PNG (27.29 KiB) Viewed 1939 times

2.PNG (26.15 KiB) Viewed 1939 times

EDIT:

OK I missed I need to get from archive.org it seems.

[exxos]

Windows reports the driver had been successfully installed, but the software simply does not find the programmer

Capture.PNG (124.92 KiB) Viewed 1932 times

[beel1]

You probably need to install the libusb driver from Zadig: https://sigrok.org/wiki/Windows#Device_ ... USB_driver
Once detected you will also need the FPGA firmware/bitstream files: https://sigrok.org/gitweb/?p=sigrok-fir ... 6a;hb=HEAD

[sporniket]

I thought you were on linux now ?

[exxos]

You probably need to install the libusb driver from Zadig: https://sigrok.org/wiki/Windows#Device_ ... USB_driver
Once detected you will also need the FPGA firmware/bitstream files: https://sigrok.org/gitweb/?p=sigrok-fir ... 6a;hb=HEAD

Okay thanks I will give that a try.

[exxos]

I thought you were on linux now ?

My laptop is on Linux, but my main PC is win7.

[exxos]

You probably need to install the libusb driver from Zadig: https://sigrok.org/wiki/Windows#Device_ ... USB_driver

Seems it was already installed but a slightly lesser version. Still cannot detect it in pulseview though

[beel1]

Seems it was already installed but a slightly lesser version. Still cannot detect it in pulseview though

Someone tried this if it helps:

Finally got it working on all my Windows 7/10 Systems.
This is what i did, with Zadiag :
Install libusb-Driver, re-connect Device, install winUSB-Driver, re-connect Device, install libusbK, re-connect Device, then again installed libusb.
And voila, started Pulsview and all OK.

http://sigrok.org/bugzilla/show_bug.cgi?id=650#c25
Concerning the firmware, it's already bundled in the 0.4.2 release: https://sigrok.org/download/binary/puls ... taller.exe

[exxos]

I've tried that trick and still doesn't work. Think it's why I gave up before with the thing in the end. It must have only ever worked with xp on my laptop.