STE 32MHz PLUG IN BOOSTER (again) 2021 variation

[philbo34]

Arrived today. On nights while sat .
Will build then and report progress

[exxos]

Arrived today. On nights while sat .
Will build then and report progress

Have fun

[philbo34]

Build underway. Just header pins to go but our fine solder has been nicked so will finish at home tomorrow.
@exxos
Only question is that's the 22uf 63v cap for. A test or a bonus item
Or have a been too stupid and not read something

[exxos]

Build underway. Just header pins to go but our fine solder has been nicked so will finish at home tomorrow.
@exxos
Only question is that's the 22uf 63v cap for. A test or a bonus item
Or have a been too stupid and not read something

Its to bodge on the cap on the reset circuit as your machine probably won't reset when the booster is installed..

[HigashiJun]

Still waiting for mine, but I guess distance matters...

[philbo34]

Cap across ç100 ?

[exxos]

Cap across ç100 ?

https://www.exxosforum.co.uk/forum/viewt ... 587#p26587

[philbo34]

Cheers.
What's best tech for soldering the headers.
I've got 0.6mm solder . 0.2mm tip
Cleaned board , plenty of flux but struggling to get solder to flow. Even tried upto 400c .
Or is it just lack of practice

[exxos]

What's best tech for soldering the headers.
I've got 0.6mm solder . 0.2mm tip

Sounds like what I do...

[philbo34]

I changed tip and solder seems to be better now