Added!
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
H5 BUYERS INTERESTS
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1371
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: H5 BUYERS INTERESTS
I would like to get one, please.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
Re: H5 BUYERS INTERESTS
Added!
Re: H5 BUYERS INTERESTS
Better jump on this before the limit cap is set 
BTW, since this time it's SMT, is the pre assembly board of caps/res going to take that long? Is pre-ass/bare coming in the same package? I mean, I can go either way. I can solder in all those my self, but rather not. I get that is was more of a special order last time considering all was hand soldered and this time it's a pick-n-place job. I am sure some want all the sockets and as much pre soldered they can get. Enough rant...
I take one PCB with pre assembly of caps/res, if it arrives about the same time. Otherwise a bare PCB, thanks.
BTW, since this time it's SMT, is the pre assembly board of caps/res going to take that long? Is pre-ass/bare coming in the same package? I mean, I can go either way. I can solder in all those my self, but rather not. I get that is was more of a special order last time considering all was hand soldered and this time it's a pick-n-place job. I am sure some want all the sockets and as much pre soldered they can get. Enough rant...
I take one PCB with pre assembly of caps/res, if it arrives about the same time. Otherwise a bare PCB, thanks.
Re: H5 BUYERS INTERESTS
@ube Added!
@DoG Added!
@DoG The SMT generic parts will be assembled at the factory along with the PCBs. The delay last time was because of the PCBs was sent to a UK company to assemble the SMT and through hole. All other parts will remain soldered by the buyer.
@DoG Added!
@DoG The SMT generic parts will be assembled at the factory along with the PCBs. The delay last time was because of the PCBs was sent to a UK company to assemble the SMT and through hole. All other parts will remain soldered by the buyer.
Re: H5 BUYERS INTERESTS
Great!exxos wrote: Thu May 21, 2020 9:10 pm...
@DoG The SMT generic parts will be assembled at the factory along with the PCBs. The delay last time was because of the PCBs was sent to a UK company to assemble the SMT and through hole. All other parts will remain soldered by the buyer.
Re: H5 BUYERS INTERESTS
I'd recommend most to get the boards with the pressssembled smt components. It'll save so much time in self assembly and shopping for parts.
Even though I've now built 2 Alpha boards and 3 H4 boards I'd get mine preassembled with the smt stuff leaving the easier stuff for after. And let's face it, a machine can solder surface mount stuff far better and faster than I can.
Even though I've now built 2 Alpha boards and 3 H4 boards I'd get mine preassembled with the smt stuff leaving the easier stuff for after. And let's face it, a machine can solder surface mount stuff far better and faster than I can.
If it ain't broke, test it to Destruction.
Re: H5 BUYERS INTERESTS
I agree @PhilC. I build boards all the time (have a few SMT ones this weekend to do). I would much rather have the board supplied with all the SMT work done as it will save time and effort which I can use elsewherePhilC wrote: Thu May 21, 2020 9:15 pm I'd recommend most to get the boards with the pressssembled smt components. It'll save so much time in self assembly and shopping for parts.
Even though I've now built 2 Alpha boards and 3 H4 boards I'd get mine preassembled with the smt stuff leaving the easier stuff for after. And let's face it, a machine can solder surface mount stuff far better and faster than I can.
Re: H5 BUYERS INTERESTS
ill take 1 please.
cheers
cheers