Ok, i'll let You know, Alenalenppc wrote: Sun Apr 21, 2019 3:49 pm 8 bit dreams, please let us know if any of those 060 are not fakes and if so where you got them from. Hopefully I'll get to build my 060 prototype soon too
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF360 Discussions
Moderators: terriblefire, Terriblefire Moderator
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF360 Discussions
Retro computer hardware & repair in Germany
Re: TF360 Discussions
I have 15 cpu MC68LC060RC66. Soldered.
And I am ready to sell them. But for this I need to check them. I will wait for the first available release of the 360 motherboard. And after checking everyone, I will sell them if you need them and you are not afraid of what they are soldering.
These are the original Motorola processors. And they are cheap.))))
And I am ready to sell them. But for this I need to check them. I will wait for the first available release of the 360 motherboard. And after checking everyone, I will sell them if you need them and you are not afraid of what they are soldering.
- IMG-20190421-WA0019.jpeg (190.88 KiB) Viewed 6452 times
These are the original Motorola processors. And they are cheap.))))
Re: TF360 Discussions
TF360.....third one to breathe Life aswell as Steve`s and Chuckys
- Attachments
-
- TF360 first contact.jpg (195.33 KiB) Viewed 6407 times
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Discussions
Is the bus CPLD getting warm?supaduper wrote: Tue May 07, 2019 1:30 pm TF360.....third one to breathe Life aswell as Steve`s and Chuckys
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Discussions
Yes Steve, its all getting warm lol, will have to heatsink the Volt reg like you
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Discussions
So by my rekoning i'm 3 months ahead of where I expected to be with this board. I was expecting alot more issues with the initial bringup.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Discussions
Mate you are well ahead, end of ! 
Re: TF360 Discussions
The 68060 libraries working now?
Re: TF360 Discussions
Not quite I am using the lizzard libs
on an OS 3.9 and it boots to WB with some functionality but as Steve says with bugsRe: TF360 Discussions
Hey.. do not jinx itterriblefire wrote: Tue May 07, 2019 2:21 pm So by my rekoning i'm 3 months ahead of where I expected to be with this board. I was expecting alot more issues with the initial bringup.