My own first ST project.

[PhilC]

The above is presuming you are looking at the ST, not the cart

[PhilC]

Actually, found it, 1,3,5,7,9 etc top and 2,4,6,8,10 etc for bottom, from left to right

[PhilC]

So this is what I've got so far:

Screenshot 2019-01-06 at 21.15.15.png (45.89 KiB) Viewed 3721 times

Next to learn what to do with bigger ROMS etc. might even order one of these anyway, to see if it works

[Icky]

So this is what I've got so far:

Screenshot 2019-01-06 at 21.15.15.png

Next to learn what to do with bigger ROMS etc. might even order one of these anyway, to see if it works

looking good. You may have the same problem I did with an ST in its case. You may want to extend the connector a bit so it fits in to the socket giving the case some clearance.

[PhilC]

Thanks for the advice Icky, I did look into getting this made but will skip this one and head straight for the next revision I think.