Limited TF536 Run - Sort of Sales (All gone)

Post by **alenppc** » Fri Jan 24, 2020 9:09 pm

PhilC wrote: Fri Jan 24, 2020 9:02 pm OOpps, so I've made a boo boo.

I've bought and soldered on a XC95144XL-10TQG144I instead of the 288. Will the firmware fit into the 144 with 64mb ram?

Nope, you need a 288

Post by **PhilC** » Fri Jan 24, 2020 9:19 pm

That's what I thought, thanks for confirming.

Money will be running next pay day then.

Post by **alenppc** » Fri Jan 24, 2020 9:54 pm

IDE speed on the 536:

: ide.jpg (64.82 KiB) Viewed 4141 times

mattymuc · Post by **mattymuc** » Fri Jan 24, 2020 10:03 pm

How is it possible that IDE is so much faster on your card than on mine?
I have tried different compact flash cards, there's no difference.

I will test it in an A500 mainboard tomorrow.

Post by **alenppc** » Fri Jan 24, 2020 10:07 pm

mattymuc wrote: Fri Jan 24, 2020 10:03 pm How is it possible that IDE is so much faster on your card than on mine?
I have tried different compact flash cards, there's no difference.

I will test it in an A500 mainboard tomorrow.

My bet is that you have a short somewhere... The CPLD shouldn't be getting hot.

mattymuc · Post by **mattymuc** » Fri Jan 24, 2020 10:16 pm

There is definitely no short circuit!

go0se · Post by **go0se** » Fri Jan 24, 2020 10:25 pm

mattymuc wrote: Fri Jan 24, 2020 10:03 pm How is it possible that IDE is so much faster on your card than on mine?
I have tried different compact flash cards, there's no difference.

I will test it in an A500 mainboard tomorrow.

Can you post close up photos of your CF adapter. Both sides if possible.

Justme14 · Post by **Justme14** » Sat Jan 25, 2020 1:56 pm

Hi ,

Received my board In the mailbox yesterday and started soldering today.
Saddly I could not finished the board, as I ordered 4 of FET switched IC ,but actually needed 6

.

Board already starts ok with Diagrom.. but offcourse without fastram..

Anyway,I orded some extra Fet Switched IC and hope to finish it next week.... will post again for the result..

Post by **arkadiusz.makarenko** » Sat Jan 25, 2020 4:35 pm

I was hoping to get my parts from Mouser last night, unfortunately parcel was stuck on London airport fro 2 days.
So most likely posts will be delivered on Monday. So I will have time to build card next weekend.

stephen_usher · Post by **stephen_usher** » Sat Jan 25, 2020 5:27 pm

Customs waits are the hell of getting stuff from the 'States. It's usually about 4 days, plus more if you have to pay duty.

exxos's Atari, Amiga & retro forum

Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)