TF536 Rev 2 Design Complete (all gone)

LADmachining · Post by **LADmachining** » 09 May 2020 12:01

Well, I don't have a spare CPLD, as my one had the same bad packaging you had and all of the corner pins are bent. :x

Post by **terriblefire** » 09 May 2020 12:04

LADmachining wrote: 09 May 2020 12:01 Well, I don't have a spare CPLD, as my one had the same bad packaging you had and all of the corner pins are bent. :x

Did you get a refund from RS?

LADmachining · Post by **LADmachining** » 09 May 2020 12:29

terriblefire wrote: 09 May 2020 12:04
LADmachining wrote: 09 May 2020 12:01 Well, I don't have a spare CPLD, as my one had the same bad packaging you had and all of the corner pins are bent. :x
Did you get a refund from RS?

Will have to contact them Monday, hopefully they can send me another.

Post by **terriblefire** » 09 May 2020 12:38

LADmachining wrote: 09 May 2020 12:29
terriblefire wrote: 09 May 2020 12:04

Did you get a refund from RS?
Will have to contact them Monday, hopefully they can send me another.

You can do it automatically via the web interface.. Just go to returns.

Post by **terriblefire** » 09 May 2020 15:09

Has anyone tested the rev2 in an ST?

I've just tried my rev 1 and rev 2 with identical firmware code and the rev 1 is fine and the rev 2 sulks...

Post by **PhilC** » 09 May 2020 15:19

terriblefire wrote: 09 May 2020 15:09 Has anyone tested the rev2 in an ST?

I've just tried my rev 1 and rev 2 with identical firmware code and the rev 1 is fine and the rev 2 sulks...

I've had my Rev 2 running TOS 2.06 but its a bit hit and miss, I get 8 bombs sometimes and boots the next.

I've got as far as running Gembench with it a few times (slow results as the firmware wants tweaking as you know)

Post by **PhilC** » 09 May 2020 15:56

Managed to burn the latest EmuTos to rom and it boots to desktop fine with that.

I'm using one of exxos's ide boards as the rom decocder tho, so not tested the ide interfaceon

Edit:

won't run Gembench though as I get kernel errors etc and of course this IDE board is probably confusing the hell out of it.

Post by **terriblefire** » 09 May 2020 16:34

PhilC wrote: 09 May 2020 15:56 Managed to burn the latest EmuTos to rom and it boots to desktop fine with that.

I'm using one of exxos's ide boards as the rom decocder tho, so not tested the ide interfaceon

Edit:

won't run Gembench though as I get kernel errors etc and of course this IDE board is probably confusing the hell out of it.

I'm struggling to get this ST to work at all to be fair... :/

Post by **PhilC** » 09 May 2020 17:15

terriblefire wrote: 09 May 2020 16:34
I'm struggling to get this ST to work at all to be fair... :/

I'll try and plug it into an original ST and see how it goes

Post by **terriblefire** » 09 May 2020 17:19

PhilC wrote: 09 May 2020 17:15 I'll try and plug it into an original ST and see how it goes

I've got an ST firmware if you want to test it

exxos's Atari, Amiga & retro forum

TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Re: TF536 Rev 2 Design Complete (all gone)

Who is online