Limited TF536 Run - Sort of Sales (All gone)

[ICRY]

Hello all

I am just wondering which is the best cpld version go for atm.

Many thanks

[terriblefire]

Hello all

I am just wondering which is the best cpld version go for atm.

Many thanks

Use the one in the github resource for now..

[terriblefire]

OK i have an observation that might help...

Try different CF cards. I've noticed its more sulky about the CF cards than the TF330 or 534.

[PaulJ_2.0]

OK i have an observation that might help...

Try different CF cards. I've noticed its more sulky about the CF cards than the TF330 or 534.

I only attach IDE once it has run from floppy successfully, it's not related to the IDE.

[terriblefire]

OK its been a "hole in my bucket" kinda a day.

First my A500 worked but then died. Then I got it going but the PSU died.

Ended up replacing the CPU socket on my A500+ (which was needing doing to be fair).

I'm sorry to report though that i cannot reproduce this at all on any of my Amiga's

[adam]

OK its been a "hole in my bucket" kinda a day.

First my A500 worked but then died. Then I got it going but the PSU died.

Ended up replacing the CPU socket on my A500+ (which was needing doing to be fair).

I'm sorry to report though that i cannot reproduce this at all on any of my Amiga's

This is so weird that i guess somebody with affected setup should send you their a500 mobo + TF536, including CPU.

[PaulJ_2.0]

If it helps, when uncooled Diagrom hangs here:

CPU: 68030 FPU: NONE MMU: NOT CHECKED

Checking for fastmem
Pressing left mousebutton will cancel detection (if hanged)

Checking if a 24 Bit address cpu is used: NO
- Checking for A3000/A4000 Motherboardmemory
- Checking for CPU-Board Memory (most A3k/A4k)
- Checking for CPU-Board Memory (most A1200)

Cooled it gives:

CPU: 68030 FPU: NONE MMU: NOT CHECKED

Checking for fastmem
Pressing left mousebutton will cancel detection (if hanged)

Checking if a 24 Bit address cpu is used: NO
- Checking for A3000/A4000 Motherboardmemory
- Checking for CPU-Board Memory (most A3k/A4k)
- Checking for CPU-Board Memory (most A1200)
- Fastmem found between: $40000000 - $43FFFFFF
- Checking for Memory in 24 Bit area (NON AUTOCONFIG)
- Checking for Memory in Ranger or Fakefast area

[terriblefire]

Yeah i cant make it not work here.

EDIT: For what its worth this is my current firmware.. removed the CDTV patches but added the boot rom.

tf536r1_main_top_FULL_PHASE_7.zip

(18.75 KiB) Downloaded 172 times

[PaulJ_2.0]

Yeah i cant make it not work here.

EDIT: For what its worth this is my current firmware.. removed the CDTV patches but added the boot rom.

tf536r1_main_top_FULL_PHASE_7.zip

Wonderful, that fixed it.

[terriblefire]

Yeah i cant make it not work here.

EDIT: For what its worth this is my current firmware.. removed the CDTV patches but added the boot rom.

tf536r1_main_top_FULL_PHASE_7.zip

Wonderful, that fixed it.

Huh?

@alenppc try it?