Can confirm ,Just tried the TF1230 on the 1D4 with 3.2 roms and it works but with 1D4 will not work with 3.1 roms, summat in the 3.1 roms it don`t like by the looks of it..but it works with 2B with 3.1 roms ?
have not tried 3.0 roms but will tomorrow
TF1230 Beta Interest (Open Source)
Moderators: terriblefire, Terriblefire Moderator
-
supaduper
- Site sponsor

- Posts: 664
- Joined: 08 Nov 2018 12:05
-
Higgy
- Posts: 489
- Joined: 23 Apr 2019 20:05
- Location: Somerset
Re: TF1230 Beta Interest (Open Source)
I don't think anyone has tested with 3.1.4?
Hardware wise I have:
1B 3.0
1B 3.1.4
2B 3.1.4
I will have to go through this thread and collate what the results are so far and where there has been the same config between people but different results.
Hardware wise I have:
1B 3.0
1B 3.1.4
2B 3.1.4
I will have to go through this thread and collate what the results are so far and where there has been the same config between people but different results.
-
kulamario
- Posts: 238
- Joined: 29 Nov 2019 19:20
- Location: Greystones
Re: TF1230 Beta Interest (Open Source)
2B with kick 3.1 working I have twosupaduper wrote: 27 Aug 2021 19:13 Can confirm ,Just tried the TF1230 on the 1D4 with 3.2 roms and it works but with 1D4 will not work with 3.1 roms, summat in the 3.1 roms it don`t like by the looks of it..but it works with 2B with 3.1 roms ?
have not tried 3.0 roms but will tomorrow
-
kulamario
- Posts: 238
- Joined: 29 Nov 2019 19:20
- Location: Greystones
Re: TF1230 Beta Interest (Open Source)
Test is done
Both 1D4 working on kick 3.2
But on 3.1 black screen
Both 1D4 working on kick 3.2
But on 3.1 black screen
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1230 Beta Interest (Open Source)
ok this is pretty consistent. I think @Daedalus has a 1D4 board of mine sitting at his house... and he's only a few mins walk away. I supposed i should move my lazy backside
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
kulamario
- Posts: 238
- Joined: 29 Nov 2019 19:20
- Location: Greystones
Re: TF1230 Beta Interest (Open Source)
if you have a 10-minute walk, you can go if you want and you have time to do something at 1230terriblefire wrote: 28 Aug 2021 13:20 ok this is pretty consistent. I think @Daedalus has a 1D4 board of mine sitting at his house... and he's only a few mins walk away. I supposed i should move my lazy backside
-
8 Bit Dreams
- Moderator Team

- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: TF1230 Beta Interest (Open Source)
@terriblefire
Yeah, seems 1D4 with KS3.1 may be taken as a reference, since it is most piky MB from A1200 series, if card runs on it -You can call it sucsess...just hope it will still run on 2B and one MB function will not exclude other :P
Yeah, seems 1D4 with KS3.1 may be taken as a reference, since it is most piky MB from A1200 series, if card runs on it -You can call it sucsess...just hope it will still run on 2B and one MB function will not exclude other :P
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1230 Beta Interest (Open Source)
The mobo has been retrieved.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Avinitlarge
- Posts: 51
- Joined: 09 Apr 2021 23:15
- Location: Rotherham
Re: TF1230 Beta Interest (Open Source)
Ive got a 1D4, Only had a recap and booted straight up with 3.2
Edit
Both Of the TF’s I built today work.
I’ve got a pair of BooBip Rom switchers so I can try different roms if needs be.
Edit
Both Of the TF’s I built today work.
I’ve got a pair of BooBip Rom switchers so I can try different roms if needs be.
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1230 Beta Interest (Open Source)
Guys i dont know what to say. Both my 1D4s boot fine with the TF1230 on Kick 3.1...
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: ClaudeBot and 23 guests