Your right, Emutos auto detects. Sorry for being vague. But TOS 2.06 does notterriblefire wrote: 04 Aug 2020 18:27This is wrong. EmuTOS does not need a byte swap. It autodetects. I am using it right now without a swap cable.Umberto1st wrote: 04 Aug 2020 18:17 Both the 534 and 536 have required a byte swapped cable to be seen by TOS 2.06 and Emutos and TOS2.06 has never auto booted even with INT connected
TF536 on the ST
-
Umberto1st
- Posts: 105
- Joined: 27 Sep 2017 18:27
Re: TF536 on the ST
3)1040 stf/m, 2)Mega 4 ST, 1)STE, 1)Mega STE, 1)STacy, 2)Falcon 030
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF536 on the ST
OK.. scratch my last... MWHAHAHAHA... working IDE..Umberto1st wrote: 04 Aug 2020 18:32Your right, Emutos auto detects. Sorry for being vague. But TOS 2.06 does notterriblefire wrote: 04 Aug 2020 18:27
This is wrong. EmuTOS does not need a byte swap. It autodetects. I am using it right now without a swap cable.
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF536 on the ST
Ah damn... its working for read path only.. not write.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF536 on the ST
Not twisted. DO NOT TRY AND WRITE to your disk yet.. it will corrupt it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator
- Posts: 7441
- Joined: 23 Mar 2018 20:22
Re: TF536 on the ST
Back home and armed and ready to test :lol:
I've not tested the latest firmware that corrupts on writing to HD but am testing with the previous version.
I've not tested the latest firmware that corrupts on writing to HD but am testing with the previous version.
If it ain't broke, test it to Destruction.
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF536 on the ST
Try this one... No cable swap needed. But no idea how IDE performs... but its 100% plug and play.PhilC wrote: 05 Aug 2020 14:44 Back home and armed and ready to test :lol:
I've not tested the latest firmware that corrupts on writing to HD but am testing with the previous version.
I've been able to create files and save my desktop.
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator
- Posts: 7441
- Joined: 23 Mar 2018 20:22
Re: TF536 on the ST
@terriblefire That sounds cool, will give it a go and report back.
Edit:
Booting with that firmware for me gives 11 bombs on both my H4 and Mega ST. Bootung with EmuTOS shows no hard drives.
Edit:
Booting with that firmware for me gives 11 bombs on both my H4 and Mega ST. Bootung with EmuTOS shows no hard drives.
If it ain't broke, test it to Destruction.
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF536 on the ST
Booting reliably on my H4 here. :/PhilC wrote: 05 Aug 2020 16:05 @terriblefire That sounds cool, will give it a go and report back.
Edit:
Booting with that firmware for me gives 11 bombs on both my H4 and Mega ST. Bootung with EmuTOS shows no hard drives.
Will not work with a twisted IDe cable.
EDIT: this is my up to date one...
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator
- Posts: 7441
- Joined: 23 Mar 2018 20:22
Re: TF536 on the ST
I'm using a CF card with straight cable. Refresh with a previous good firmware i use for testing and its all good again but no HD
Edit: ok will try that one after dinner
Edit: ok will try that one after dinner
If it ain't broke, test it to Destruction.
Who is online
Users browsing this forum: ClaudeBot and 0 guests