Let's build a CTPCI!

General discussions or ideas about hardware.
foft
Posts: 348
Joined: Mon Mar 28, 2022 12:20 pm

Re: Let's build a CTPCI!

Post by foft »

I got the USB card. I had to modify it to disconnect V I/O and 5V, otherwise its tries to connect 5V and 3.3V lines. Fake universal cards, sigh.

Anyway USB then works with 2.02 beta 10. Though I can't get my IDE booting now with 2.02 beta 10 and it just seems quite unstable. Pretty sure it worked before with a different compact flash card (my old one failed).

I think I can stick with 2.01 right for Radeon and then use Mint for USB keyboard/mouse and RTL8139 drivers. Is that correct?

BTW thanks @mikro for answering my Mint queries before. Regarding (ii) I ran the 'bash' command from the bin folder and it opened a window. The way toswin2 was hanging I ran a shell from the menu which, as you say, presumably also starts bash behind the scenes. Perhaps running 'bash' directly it starts a different terminal emulator gui?
User avatar
Cyprian
Posts: 573
Joined: Fri Dec 22, 2017 9:16 am
Location: Warszawa, Poland
Contact:

Re: Let's build a CTPCI!

Post by Cyprian »

Not sure if you've noticed, but there's a nice case available for CTPCI:
https://atarifan.pl/produkt/ptodt-obudo ... ri-falcon/

ctpi01.jpg
ctpi01.jpg (250.22 KiB) Viewed 3440 times
ctpi08.jpg
ctpi08.jpg (175.44 KiB) Viewed 3440 times

This case is released under the auspices of the "Polish Society for the Protection of Technical Heritage": https://ptodt.org.pl/
Atari: V4sa TT030 Falcon030 Mega ST Mega STe 1040 STe 520 STm 800XL 65XE Jaguar Lynx I/II 7800 Portfolio / VME: ATW800/2 Mach64 Mach32 ET4000 CrazyDots PAMNet / SM146 SC1435 SM124 / Antonia2 ATSpeedC16 TF536 PAK68/3
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
User avatar
HigashiJun
Posts: 2510
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: Let's build a CTPCI!

Post by HigashiJun »

Looks good !
mikro
Posts: 868
Joined: Mon Aug 28, 2017 11:22 pm
Location: Kosice, Slovakia
Contact:

Re: Let's build a CTPCI!

Post by mikro »

Speaking of cases... I have managed to acquire a pretty cool one but needs some modding. However I have discovered that CTPCI's PCI PCB isn't exactly... standard:

PXL_20240119_190437956.jpg
PXL_20240119_190437956.jpg (83.81 KiB) Viewed 3165 times
@foft you mentioned doing some adjustments, I guess making the spacing more aligned with PC world wasn't one of them?
User avatar
HigashiJun
Posts: 2510
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: Let's build a CTPCI!

Post by HigashiJun »

Indeed...

BTW, the PTODT has a lot of nice stuff but their ordering system could be improved...

Only wire transfers are accepted as mean of payment.

Don't know for folks in Europe, but making a wire transfer from Japan to abroad is a real pain in...

You also have to contact them by mail prior to making an order, which is fine, but it would be nice from them to reply to your inquiry.
foft
Posts: 348
Joined: Mon Mar 28, 2022 12:20 pm

Re: Let's build a CTPCI!

Post by foft »

mikro wrote: Fri Jan 19, 2024 7:08 pm @foft you mentioned doing some adjustments, I guess making the spacing more aligned with PC world wasn't one of them?
No, the gerbers were just offset a lot which the board house didn’t like. I just removed the offsets and aligned them.
User avatar
Cyprian
Posts: 573
Joined: Fri Dec 22, 2017 9:16 am
Location: Warszawa, Poland
Contact:

Re: Let's build a CTPCI!

Post by Cyprian »

HigashiJun wrote: Sat Jan 20, 2024 5:45 am BTW, the PTODT has a lot of nice stuff but their ordering system could be improved...
we plan expand the offer for 16/32bit Atari
HigashiJun wrote: Sat Jan 20, 2024 5:45 am BTW, the PTODT has a lot of nice stuff but their ordering system could be improved...

Only wire transfers are accepted as mean of payment.

Don't know for folks in Europe, but making a wire transfer from Japan to abroad is a real pain in...
what type of payment would be convenient for you?
I can talk with the Team about it.
Atari: V4sa TT030 Falcon030 Mega ST Mega STe 1040 STe 520 STm 800XL 65XE Jaguar Lynx I/II 7800 Portfolio / VME: ATW800/2 Mach64 Mach32 ET4000 CrazyDots PAMNet / SM146 SC1435 SM124 / Antonia2 ATSpeedC16 TF536 PAK68/3
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
User avatar
HigashiJun
Posts: 2510
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: Let's build a CTPCI!

Post by HigashiJun »

Cyprian wrote: Sat Jan 20, 2024 9:57 am what type of payment would be convenient for you?
I can talk with the Team about it.
I guess payments by credit card would be problematic, so the common PayPal way would be fine.

8-)
User avatar
HigashiJun
Posts: 2510
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: Let's build a CTPCI!

Post by HigashiJun »

@Cyprian

Since ATARI FAN added credit cards as means of payment, I ordered a CTPCI BOX on July 25th of 2024.

More than 2 months has passed and still nothing delivered to an address in Europe (no way to be delivered in Japan).

I have just sent them an email and I really hope to have an answer soon explaining what's going on.
mikro
Posts: 868
Joined: Mon Aug 28, 2017 11:22 pm
Location: Kosice, Slovakia
Contact:

Re: Let's build a CTPCI!

Post by mikro »

@HigashiJun patience, they do it solely on a hobby basis. It took some time to deliver mine, too (and I live in Slovakia, next to Poland).
Post Reply

Return to “HARDWARE DISCUSSIONS”