Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

ST-IDE-ROM Dev Board v1 - BETA Testers

Related information and WIP etc
Post Reply
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15083
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:
Contact rubber_jonnie

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie »

PhilC wrote: Mon Apr 08, 2019 4:19 pm
I have some heat proof gloves if they are any use for you? :P
I'd better crack on then!

I do have oven gloves, though they make holding a soldering iron difficult.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Top
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ »

rubber_jonnie wrote: Mon Apr 08, 2019 4:22 pm I do have oven gloves, though they make holding a soldering iron difficult.
Rj, yes its more difficult but you would avoid the burned pinky... :) :) :)
Top
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15083
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:
Contact rubber_jonnie

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie »

PaulJ wrote: Mon Apr 08, 2019 5:09 pm
rubber_jonnie wrote: Mon Apr 08, 2019 4:22 pm I do have oven gloves, though they make holding a soldering iron difficult.
Rj, yes its more difficult but you would avoid the burned pinky... :) :) :)
I expect some other form of disaster would have befallen me if I'd tried to use oven gloves......

:dizzy:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Top
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15083
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:
Contact rubber_jonnie

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie »

Build complete!
IMG_20190408_222758.jpg
IMG_20190408_222758.jpg (329.73 KiB) Viewed 4061 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28696
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:
Contact exxos

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by exxos »

:bravo:
Top
User avatar
Icky
Site Admin
Site Admin
Posts: 4390
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by Icky »

:bravo: - Now for the patches :)
Top
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15083
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:
Contact rubber_jonnie

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie »

Aye, patches are next, luckily not too many 😁
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Top
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ »

:hide: :hide: :hide:
rubber_jonnie wrote: Mon Apr 08, 2019 10:29 pm Build complete!

IMG_20190408_222758.jpg
RJ, I think you have your eprom in backwards. I believe pin 1 should be facing off the board not at the processor. :hide: :hide: :hide:
Top
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ »

SH%t, ordered the wrong PLCC socket.. :headbang: :headbang: :headbang:
Top
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ »

PaulJ wrote: Tue Apr 09, 2019 12:50 am SH%t, ordered the wrong PLCC socket.. :headbang: :headbang: :headbang:
False alarm, for some reason mouser threw in a couple 68 pin plcc sockets just to f*ck with my mind, Hmmm oh well the price was right.. :thumbup: :thumbup: :thumbup:
Top
Post Reply

Return to “H4 MONGREL EDITION DEVELOPMENT & INFO”