Not the point thoughPhilC wrote: Fri Aug 28, 2020 10:53 pm You do know its probably cheaper to buy rawl plugs than print your own?![]()
![]()
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
exxos blog - random goings on
Re: exxos blog - random goings on
Re: exxos blog - random goings on
It probably won't work with the SACD layers. SACD is limited to analogue or HDMI out. They can't pass DSD via SPDIF/TOSlink and the DAC needs to be able to decode DSD too. Some players can convert DSD to PCM via HDMI (like my Oppo) but I'm not aware of any that can do that via SPDIF etc. Only the 44.1khz CD layer of SACD can be played back PCM. It is in part a copy protection mechanism.exxos wrote: Fri Aug 28, 2020 9:19 pm Brought one of these cheap DAC amps.. https://www.ebay.co.uk/itm/283794891977
My dad did buy a expensive DAC, but I wanted one with tone controls on it as mostly I use headphones and need a bit of tweaking..
So I should be able to go optical out from the SACD player to this DAC unit..
I'll be interested to see if this works.
Re: exxos blog - random goings on
Ah yep I never thought about the data stream, I half assumed the optical out was decoded data, else the port would be almost useless otherwise 
Re: exxos blog - random goings on
On an SACD player the digital ports are pretty useless, its used for DTS, DD and PCM. I have a Pioneer 676a with six analogue cables to a Marantz SR4500 with discreet AC3 inputs. Gen 1 SACD, works a treat. A hacked PS3 is another option, but they are rarer than rocking horse droppings.
Re: exxos blog - random goings on
Sounds like I'll have to use the rca outputs and do some hacking on the box to tap into the analogue side of things
the DAC is probably a bit rubbish anyway
I'll rip it out and solder some rca sockets on it 
Re: exxos blog - random goings on
Starting to hate 0.2mm nozzle...
Re: exxos blog - random goings on
You have made a noodle spool holder @exxos
Re: exxos blog - random goings on
That wasn't my first thought...
Re: exxos blog - random goings on
it looks nearly as good as the popcorn @Ickys printer made last time i saw it running 
If it ain't broke, test it to Destruction.
Re: exxos blog - random goings on
New modification for my pasting rig almost done
This one should let me "lift" the metal stencils out of the way...
Its a bit of a odd shape all over the place, so using supports on this print.
Its a bit of a odd shape all over the place, so using supports on this print.

