General Stuff(tm)

[stephen_usher]

New toy... Or at least toolkit...

IMG_3072.jpeg

IMG_3073.jpeg

IMG_3074.jpeg

IMG_3075.jpeg

That's basically every type of bit for the electric screwdriver, plus spludgers etc. etc. etc.

Not sure about the translation from Chinese to English is great though...

IMG_3076.jpeg

[exxos]

Very salubrious :)

[stephen_usher]

Today's fun...

Stripped, cleaned and lubricated the second Mac SE/30 floppy drive so that's nice and clunky when the floppy is inserted.

Watching plaster dry. Yes, seriously!

My outbuilding was plastered on Monday morning but due to (a) the weather and the humidity, and (b) the builders being silly and keeping the door and window closed it's only just really drying out with the help of every fan I have available. Unfortunately, because it wasn't dry yesterday they couldn't do the first "mist" coat of paint and this is likely to delay the installation of the electrical trunking, which was due on Monday. So, the whole project slips again. It's already beyond the multiply postponed official end date.

Anyway, here are some exciting pictures of drying plaster...

IMG_3077.jpeg

IMG_3078.jpeg

IMG_3079.jpeg

I can tell that you're beside yourselves with excitement and have just swooned. ;-)

[rubber_jonnie]

New toy... Or at least toolkit...



IMG_3072.jpeg
IMG_3073.jpeg
IMG_3074.jpeg
IMG_3075.jpeg

That's basically every type of bit for the electric screwdriver, plus spludgers etc. etc. etc.

Not sure about the translation from Chinese to English is great though...



IMG_3076.jpeg

Nice :)

I could do with consolidating my own screwdriver sets as I have all different types and sets I've gathered over the years. I was considering an iFixit kit, but that looks pretty gdecent.

[rubber_jonnie]

Today's fun...

Stripped, cleaned and lubricated the second Mac SE/30 floppy drive so that's nice and clunky when the floppy is inserted.

Watching plaster dry. Yes, seriously!

My outbuilding was plastered on Monday morning but due to (a) the weather and the humidity, and (b) the builders being silly and keeping the door and window closed it's only just really drying out with the help of every fan I have available. Unfortunately, because it wasn't dry yesterday they couldn't do the first "mist" coat of paint and this is likely to delay the installation of the electrical trunking, which was due on Monday. So, the whole project slips again. It's already beyond the multiply postponed official end date.

Anyway, here are some exciting pictures of drying plaster...


IMG_3077.jpeg


IMG_3078.jpeg


IMG_3079.jpeg


I can tell that you're beside yourselves with excitement and have just swooned. ;-)

Looking good :)

As soon as the plaster is dry enough to paint, you can start to watch the paint dry :)

[JezC]

As soon as the plaster is dry enough to paint, you can start to watch the paint dry :)

Careful - the excitement may be just too much! ;)

:hide:

[rubber_jonnie]

As soon as the plaster is dry enough to paint, you can start to watch the paint dry :)

Careful - the excitement may be just too much! ;)

:hide:

:dizzy:

[stephen_usher]

I think we need warning signs for messages... just in case.

[stephen_usher]

Something slightly retro worked upon this afternoon, but not computing.

I've been working on my Dad's car getting it presentable for the funeral tomorrow. Lots of washing, T-Cut and replacing the old badges.

IMG_3113.jpeg

IMG_3114.jpeg

The car was originally mine, bought new in November 2000, but I passed it on to my Dad in 2007.

It could do with a respray and there's a little rush which needs treating on the rear wheel arches, oh and some mechanical stuff too, but for a 22 year old car it's not in too bad a nick and I want to renovate it completely eventually.

[JezC]

Hope everything goes smoothly tomorrow @stephen_usher!

Will be thinking of you (and remembering my Dad's funeral etc. at the same time)

:awwww: