Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
Badwolf
Site sponsor
Site sponsor
Posts: 3060
Joined: Tue Nov 19, 2019 12:09 pm

Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE

Post by Badwolf »

Chris O. wrote: Wed Apr 02, 2025 2:26 am All files including stl + obj + rsdocx ;)
:dualthumbup:

BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Top
User avatar
Chris O.
Posts: 35
Joined: Sun Oct 30, 2022 1:41 pm

Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE

Post by Chris O. »

Thanks :D
I will be releasing 3D files for the dust cover door tomorrow.
Attachments
PXL_20250404_043331147.jpg
PXL_20250404_043331147.jpg (268.63 KiB) Viewed 2316 times
Top
User avatar
Chris O.
Posts: 35
Joined: Sun Oct 30, 2022 1:41 pm

Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE

Post by Chris O. »

Update:
So here is the dust cover door for SONY MPF920 1.44/720k.
Needs the door spring from original drive.
Attachments
SONY F HD Dust Door v1.zip
(1.13 MiB) Downloaded 39 times
SONY F HD Dust Door v2 PIC1.jpg
SONY F HD Dust Door v2 PIC1.jpg (63.21 KiB) Viewed 2290 times
SONY F HD Dust Door v2 PIC2.jpg
SONY F HD Dust Door v2 PIC2.jpg (24.89 KiB) Viewed 2290 times
PXL_20250406_143405919.jpg
PXL_20250406_143405919.jpg (196.8 KiB) Viewed 2290 times
PXL_20250406_143333097.jpg
PXL_20250406_143333097.jpg (132.73 KiB) Viewed 2290 times
Top
Post Reply

Return to “3D MODELS”