As I am local to Aus and have built 2 so far, happy to help if you need someone local.sety wrote: Sat Feb 22, 2025 9:35 amThanks! Ordered! I could not find that anywhere in Aus. Not even RS had it.You have to get a PGA 206 socket, such as this one:
https://programatory.archi-tech.com.pl/ ... C68060/273
Raven 060 (sety's build)
Re: Raven 060 (sety's build)
Re: Raven 060 (sety's build)
tysm! tbh I wasn't expecting this build to cost any less than a modern 4090 gaming rig, given Australia's "postage paywall" but the fact that another Australian has built not one but two, is pure motivation.kodak80 wrote: Sat Feb 22, 2025 12:49 pm As I am local to Aus and have built 2 so far, happy to help if you need someone local.![]()
I'm very excited to start this build. There is something so cool about building a homebrew 32 bit computer!
I'll be in touch! Were you able to fill any of the BOM from Altronics/Jaycar?
Stuart
Re: Raven 060 (sety's build)
Most of the BOM for me was obtained through Mouser with ISA sockets from Aliexpress. The PGA-206 sockets I got from the site the others used.sety wrote: Sun Feb 23, 2025 12:02 pmtysm! tbh I wasn't expecting this build to cost any less than a modern 4090 gaming rig, given Australia's "postage paywall" but the fact that another Australian has built not one but two, is pure motivation.kodak80 wrote: Sat Feb 22, 2025 12:49 pm As I am local to Aus and have built 2 so far, happy to help if you need someone local.![]()
I'm very excited to start this build. There is something so cool about building a homebrew 32 bit computer!
I'll be in touch! Were you able to fill any of the BOM from Altronics/Jaycar?
Stuart
Re: Raven 060 (sety's build)
The goodies are starting to arrive.
I got a stencil too! I normally cut my own out of mylar (or even shiny craft material) because I don't like doing tiny caps and resistors (They stick to the iron!) but the cost has come down so I'm like "Why not?" It's a very nice stencil. Much better than what I can do with a CO2 cutter.
I got a stencil too! I normally cut my own out of mylar (or even shiny craft material) because I don't like doing tiny caps and resistors (They stick to the iron!) but the cost has come down so I'm like "Why not?" It's a very nice stencil. Much better than what I can do with a CO2 cutter.
Re: Raven 060 (sety's build)
A white Raven 
Raven 060 rev 6 96MHz
ET4000AX 1Mb T0
GD5426 1Mb
PicoGUS 2.0
ET4000AX 1Mb T0
GD5426 1Mb
PicoGUS 2.0
- HigashiJun
- Posts: 2515
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Raven 060 (sety's build)
It's an albino one.

Re: Raven 060 (sety's build)
this white looks so nice
Atari: V4sa TT030 Falcon030 Mega ST Mega STe 1040 STe 520 STm 800XL 65XE Jaguar Lynx I/II 7800 Portfolio / VME: ATW800/2 Mach64 Mach32 ET4000 CrazyDots PAMNet / SM146 SC1435 SM124 / Antonia2 ATSpeedC16 TF536 PAK68/3
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
Re: Raven 060 (sety's build)
Wow, that looks really cool in white!
Re: Raven 060 (sety's build)
Hi All,
Apologies if this has already been asked, the Raven thread is long and I don't know how to search for this.
Would the ET4000 remake by Alexandru Groza work in the Raven? I'm having a hard time finding an ISA ET4000 locally and it might make more sense for me spend the money building a new one rather than having to stomach dropping $300AUD on a 30 year old card from eBay.
https://www.alexandrugroza.ro/microelec ... index.html
thanks
Apologies if this has already been asked, the Raven thread is long and I don't know how to search for this.
Would the ET4000 remake by Alexandru Groza work in the Raven? I'm having a hard time finding an ISA ET4000 locally and it might make more sense for me spend the money building a new one rather than having to stomach dropping $300AUD on a 30 year old card from eBay.
https://www.alexandrugroza.ro/microelec ... index.html
thanks
- frank.lukas
- Posts: 816
- Joined: Fri Jan 19, 2018 11:52 am
Re: Raven 060 (sety's build)
There is a NOVA driver for the TSENG ET4000/W32i but it support only 1MB Video Ram.
@agranlund can say more to it ...
@agranlund can say more to it ...
