in the TF330 the phase is fixed at 1 because the clock speed is fixed at 50mhz.
The code is here ...
https://github.com/hologenics/hg330/blo ... ocks.v#L38
However TF1260 fw versions have different raw phases for different tool PHASE values.
that's all the documentation i'm prepared for give.
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF1260 100Mhz 060 Rev 4 o'clock woes solved with PHASE
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 100Mhz 060 Rev 4 o'clock woes solved with PHASE
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."