- phoenix full.jpeg (175.21 KiB) Viewed 591 times
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Phoenix stuck in reset
-
russellnash
- Site sponsor
- Posts: 222
- Joined: Fri Mar 26, 2021 2:46 pm
Re: Phoenix stuck in reset
Here is a photo. I tried soldering a proper jumper in place and unsurprisingly it did nothing.
Re: Phoenix stuck in reset
I would check the output voltage on pin 8 and pin 12. If the inputs are working, then maybe a problem with the pullup.
- 1.PNG (29.3 KiB) Viewed 590 times
- 2.PNG (96.07 KiB) Viewed 590 times
- 3.PNG (75.61 KiB) Viewed 590 times
-
russellnash
- Site sponsor
- Posts: 222
- Joined: Fri Mar 26, 2021 2:46 pm
Re: Phoenix stuck in reset
Pin 8 and 12 on the LS07 chip? 4.5V and 1.3V.