:lolbig: :bravo:
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
TF1260 Open File Release
Moderators: terriblefire, Terriblefire Moderator
-
exxos
- Site Admin
- Posts: 28137
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: TF1260 Open File Release
-
kludge
- Posts: 400
- Joined: 08 Nov 2018 14:05
- Location: Sweden
Re: TF1260 Open File Release
Nice! Thank you, Stephen!
:D
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
-
oggie
- Posts: 46
- Joined: 11 Oct 2019 00:21
Re: TF1260 Open File Release
Nice, thanks for all your work.
Is there a reason the bom doesn't have the RNs on the bottom side?
Is there a reason the bom doesn't have the RNs on the bottom side?
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1260 Open File Release
The RNs should be there. I supplied the BOM i use for ordering .. I’ll check again
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Ally
- Posts: 27
- Joined: 03 Oct 2021 11:48
Re: TF1260 Open File Release
thank you @terriblefire!
Those two A1200 edge connectors I bought from your ebay some time ago may yet find use! :-)
Those two A1200 edge connectors I bought from your ebay some time ago may yet find use! :-)
Amiga A1200, TF1230 & TF1260 owner. Thankyou TerribleFire :-)
20211017: Bought my first ST, Atari 520STfm C070859-001 Rev.2 (NOT Rev 2.0)
20220401: Bought my first STE, Atari 1040STe
20211017: Bought my first ST, Atari 520STfm C070859-001 Rev.2 (NOT Rev 2.0)
20220401: Bought my first STE, Atari 1040STe
-
E-Penguin
- Posts: 12
- Joined: 09 Jul 2019 13:43
Re: TF1260 Open File Release
LOL. Well said.No AmigaKit.
Still not getting my compatibility with the aca500plus I assume :lol:
Good on you for releasing it despite the scalpers :)
-
Aeberbach
- Site sponsor
- Posts: 169
- Joined: 16 Dec 2019 22:24
Re: TF1260 Open File Release
Thank you!
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1360
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: TF1260 Open File Release
Release of this project means no more 060 in the wild... ever. It will hover up even all LC. :D
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
kulamario
- Posts: 238
- Joined: 29 Nov 2019 19:20
- Location: Greystones
Re: TF1260 Open File Release
JLCPCB find only two kinds of partsterriblefire wrote: 21 Oct 2021 18:47 The RNs should be there. I supplied the BOM i use for ordering .. I’ll check again
Only caps if I good remember
-
kludge
- Posts: 400
- Joined: 08 Nov 2018 14:05
- Location: Sweden
Re: TF1260 Open File Release
Just wait for when the TF4060 dropsarkadiusz.makarenko wrote: 21 Oct 2021 19:58 Release of this project means no more 060 in the wild... ever. It will hover up even all LC. :D
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
Who is online
Users browsing this forum: alenppc, CCBot and 2 guests