Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
H5 B1 FIXES
Re: H5 B1 FIXES
Yep. As said above, there are a few fixes for rev A3. Rev B1 other than the missing hole, I don't know or have found anything else which needs fixing yet.
-
officer960
- Posts: 67
- Joined: Sun Jul 22, 2018 9:42 pm
Re: H5 B1 FIXES
@DoG @exxos Thanks fellas. Have a pile of components and patiently waiting for a time when I have the nerve built up and the house will be quiet/empty to start. Only part that has me really nervous is any SMD work... the through hole parts only has me slightly nervous. 
H5C1, H5C5B, 1040 ST, Mega ST, STe, Mega STe, Falcon, TT030, Amiga 2k V2+, Amiga 2k Video Toaster GVP030, Amiga 500, Amiga 500+ V2, Amiga 500+ Firebird V4, Amiga 1200 PiStorm, FPGA: V4SA, MiST, MiSTer, UnAmiga, U64 Elite
-
AndresPlazaR
- Posts: 147
- Joined: Wed Apr 03, 2019 3:35 pm
- Location: Boston, MA, USA
- Contact:
Re: H5 B1 FIXES
I'm also not very good at soldering SMDs. I was successful this time using a soldering iron (no heat gun) with a very fine tip, and Kapton tape to hold the component. Also, those are the first things I soldered in the board, so I could have plenty of space to go around, in different angles, with the iron.officer960 wrote: Sat Dec 12, 2020 5:07 pm @DoG @exxos Thanks fellas. Have a pile of components and patiently waiting for a time when I have the nerve built up and the house will be quiet/empty to start. Only part that has me really nervous is any SMD work... the through hole parts only has me slightly nervous.
--
Andres Plaza R.
Bluesky: @aplaza.bsky.social
Twitter: @AndresPlazaR
Andres Plaza R.
Bluesky: @aplaza.bsky.social
Twitter: @AndresPlazaR