- E3D97499-9730-40F7-8110-341AD7C5A3A2.jpeg (539.37 KiB) Viewed 3460 times
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TerribleFire's H4 Build
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
Really hoping this is the shifter...
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
@terriblefire looks like a shifter to me 
If it ain't broke, test it to Destruction.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
I am rubber you are Glue?
- A00F0272-935F-450E-8C03-9C827FA6AD31.jpeg (282.42 KiB) Viewed 3457 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
GLUE IC C101602-38
MMU IC C101601-38
Of course the MMU is located near the DRAM anyway
MMU IC C101601-38
Of course the MMU is located near the DRAM anyway
Re: TerribleFire's H4 Build
Looks a bit shifty.. bit like the owner...
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
Ok ... I have the mfp and 6850s on order... this should be everything else ...
- 8340E98B-6DF6-4785-A5FE-C81946469B59.jpeg (562.61 KiB) Viewed 3448 times
- 60E42281-FFCE-4F36-B5B8-61EB203F336B.jpeg (654.43 KiB) Viewed 3448 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
Why not just rip them off the donor ?terriblefire wrote: Sat May 16, 2020 4:19 pm Ok ... I have the mfp and 6850s on order... this should be everything else ...
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
had already ordered them before you located one.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
@exxos @terriblefire just checking, will the IMP DMA play nicely with the other non Imp chips? Or was it their shifter you had to do a mod for ?
If it ain't broke, test it to Destruction.
Re: TerribleFire's H4 Build
I've got new IMP DMA's in my store, and I used them all on my H4 without any problems.PhilC wrote: Sat May 16, 2020 5:33 pm @exxos @terriblefire just checking, will the IMP DMA play nicely with the other non Imp chips? Or was it their shifter you had to do a mod for ?