REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)

STM1 mouse lead

Problems with your machine in general.
User avatar
sandord
Posts: 764
Joined: 13 Aug 2018 22:08
Location: The Netherlands

Re: STM1 mouse lead

Post by sandord »

Nice work! :dualthumbup:

I'm curious how you managed to put the original plug on the cable.
Top
PeteW
Posts: 99
Joined: 25 Jul 2018 20:09

Re: STM1 mouse lead

Post by PeteW »

I cut the connector in half along the original mold lines, dremelled out the inside (it's filled with rubber), glued it back together and soldered onto the original connectors.

There's some pics and more detail of what I did here:
https://retrocomputerresto.wordpress.com
Top
User avatar
sandord
Posts: 764
Joined: 13 Aug 2018 22:08
Location: The Netherlands

Re: STM1 mouse lead

Post by sandord »

PeteW wrote: 24 Nov 2018 21:21 I cut the connector in half along the original mold lines, dremelled out the inside (it's filled with rubber), glued it back together and soldered onto the original connectors.

There's some pics and more detail of what I did here:
https://retrocomputerresto.wordpress.com
Thanks, it's good to know that's doable.

Bye the way, I have seen two different types of connectors on the original ST mice, one shielded and the other not.
Top

Return to “HARDWARE ISSUES”

Who is online

Users browsing this forum: ClaudeBot and 9 guests