You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

STFM case remake

The place to discuss & share your 3D models or printable parts!
terriblefire
Admin sponsor
Admin sponsor
Posts: 5685
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: STFM case remake

Post by terriblefire »

awesome work
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
User avatar
Icky
Site Admin
Site Admin
Posts: 4347
Joined: 03 Sep 2017 10:57
Location: UK

Re: STFM case remake

Post by Icky »

terriblefire wrote: 20 Nov 2021 14:39 awesome work
Thanks @terriblefire it's slow going but once done we will be able to re-house some naked STs out there :D
Top
User avatar
HigashiJun
Posts: 2328
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: STFM case remake

Post by HigashiJun »

I love that shocking pink colour...
Top
User avatar
Icky
Site Admin
Site Admin
Posts: 4347
Joined: 03 Sep 2017 10:57
Location: UK

Re: STFM case remake

Post by Icky »

HigashiJun wrote: 21 Nov 2021 04:49 I love that shocking pink colour...
It was for @exxos originally but it actually helps to see where certain issues are as it’s bright.

I prefer the dark grey the first case prototype that was glued together in sections was printed in but I have a deep purple ready for the next prototype print.

Problem is at the moment my printer is at my parents whilst I am in the midst of moving house.
Top
User avatar
HigashiJun
Posts: 2328
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: STFM case remake

Post by HigashiJun »

No matter the colour is, you have done a great job !
Top
User avatar
Badwolf
Site sponsor
Site sponsor
Posts: 3031
Joined: 19 Nov 2019 12:09

Re: STFM case remake

Post by Badwolf »

Looks grand, Icky!

BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Top
User avatar
Icky
Site Admin
Site Admin
Posts: 4347
Joined: 03 Sep 2017 10:57
Location: UK

Re: STFM case remake

Post by Icky »

HigashiJun wrote: 21 Nov 2021 12:40 No matter the colour is, you have done a great job !
Badwolf wrote: 22 Nov 2021 14:27 Looks grand, Icky!

BW
Thanks both.

Whilst in limbo during the house move thought I would work on the STE joystick ports. Draft ports in place (will eventually need to print out a prototype section to check fit) and now looking at how to incorporate a face place to cover the ports if using as an STFM case. Once this is complete all I then need to do is the STE rear panel and then case bottom is complete for STFM and STE.

Screenshot 2021-12-05 at 13.12.06.png
Screenshot 2021-12-05 at 13.11.44.png
You do not have the required permissions to view the files attached to this post.
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28213
Joined: 16 Aug 2017 23:19
Location: UK

Re: STFM case remake

Post by exxos »

Nice! :thumbup:
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7414
Joined: 23 Mar 2018 20:22

Re: STFM case remake

Post by PhilC »

Looks good to me.

I always wondered about using those for other purposes as well,maybe USB etc
If it ain't broke, test it to Destruction.
Top
User avatar
Icky
Site Admin
Site Admin
Posts: 4347
Joined: 03 Sep 2017 10:57
Location: UK

Re: STFM case remake

Post by Icky »

PhilC wrote: 05 Dec 2021 13:38 Looks good to me.

I always wondered about using those for other purposes as well,maybe USB etc
With the back panel now removable we can add slots for all sorts. e.g. USB, SD or CF card slot etc. However to your point @PhilC I just created the initial panel for the STE joystick ports and I can see we could have a few versions such as a USB port panel. Options are endless almost :)

Render has panel in a different colour to show where it is.

Screenshot 2021-12-05 at 14.05.42.png

EDIT: Clips in place on panel

Screenshot 2021-12-05 at 15.40.29.png
Screenshot 2021-12-05 at 15.41.11.png
You do not have the required permissions to view the files attached to this post.
Top

Return to “3D MODELS”

Who is online

Users browsing this forum: CCBot and 59 guests