There .. you can fix it with this : https://retrohax.net/shop/atari/spray-p ... e-st-grey/
:D :cheers:
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
STFM case remake
-
rpineau
- Posts: 534
- Joined: 17 Aug 2017 18:08
- Location: USA
Re: STFM case remake
:D :cheers:
Working ones : MegaSTE (68020) / TT030 / Falcon with AB040 & Eclipse / 1040STF
Need testing : Falcon with CT2
Need testing : Falcon with CT2
-
Cosmic Puppet
- Posts: 1731
- Joined: 02 Aug 2019 01:03
- Location: Angus!
Re: STFM case remake
Atari Barbie. :lol:
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
-
exxos
- Site Admin
- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: STFM case remake
Y'all only jealous ... :lol:
-
Cosmic Puppet
- Posts: 1731
- Joined: 02 Aug 2019 01:03
- Location: Angus!
Re: STFM case remake
:lol:
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
-
WDB
- Posts: 45
- Joined: 22 Aug 2020 16:30
Re: STFM case remake
Awesome project, my experience with printing ABS was never very good. I tried some ABS+ that is supposed have less shrinkage and was able to get a decent print every once and awhile. I need a heated chamber.
-
Icky
- Site Admin
- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: STFM case remake
Yes it was printed with ABS+. I do see improvements with the + version for shrinkage. The printer has a heated chamber and cools down gradually after the print has finished.WDB wrote: 13 Sep 2020 19:23 Awesome project, my experience with printing ABS was never very good. I tried some ABS+ that is supposed have less shrinkage and was able to get a decent print every once and awhile. I need a heated chamber.
I have been playing around with ePA-CF (carbon fibre nylon) as well. I must admit I am not to impressed with it. It can be very brittle.
-
sandord
- Posts: 763
- Joined: 13 Aug 2018 22:08
- Location: The Netherlands
Re: STFM case remake
And then there's always someone outdoing it.
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin
- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: STFM case remake
@Icky I think its a great idea to have this removable. It can fit any case such as STE, STFM, Falcon etc, Plus it mean was can custom the case for future remake boards as well :thumbup:
You do not have the required permissions to view the files attached to this post.
-
Icky
- Site Admin
- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: STFM case remake
Got to try out the removable panel prototyping today. One corner part to marry up to the back panel. They fit nice and snuggly together and has given me the dimensions to finalise this option.
You do not have the required permissions to view the files attached to this post.
-
stephen_usher
- Site sponsor
- Posts: 7355
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: STFM case remake
How easy will it be to add the symbols and labels for the inputs/outputs/reset switch?
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Who is online
Users browsing this forum: CCBot and 43 guests