REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Latest TF534 is here
Moderators: terriblefire, Terriblefire Moderator
-
alenppc
- Moderator Team
- Posts: 934
- Joined: 08 Nov 2018 12:59
Re: Latest TF534 is here
It might be present on the 2b also, maybe I just missed it. Will confirm later.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok i can confirm that i have no ESM issues on the TF534r2c @ 50Mhz on any machine A2000/A500 or even the silly CDTV.
Can someone eyeball this BOM for me.. .
https://github.com/terriblefire/tf534/b ... /README.md
Can someone eyeball this BOM for me.. .
https://github.com/terriblefire/tf534/b ... /README.md
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
alenppc
- Moderator Team
- Posts: 934
- Joined: 08 Nov 2018 12:59
Re: Latest TF534 is here
I think we found out with the 530 that the best R3 value was 47k?
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok that shouldnt make much difference. Its the FPU detect value. I usually use 1K. The manual says... it should be larger than 10K though... so hey ho i'll make it 47K.
S
S
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok I have 49 of the TF534s left. I prefer to sell them direct rather than via ebay. Contact me if you want some.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator
- Posts: 7494
- Joined: 23 Mar 2018 20:22
Re: Latest TF534 is here
Hi TF, I'd probably take a couple
If it ain't broke, test it to Destruction.
-
Justme14
- Posts: 39
- Joined: 18 Dec 2018 21:28
- Location: Netherlands
Re: Latest TF534 is here
Hi TF ,
Interested in two TF534 PCBs.
Interested in two TF534 PCBs.
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: Latest TF534 is here
Interested in 4 TF534 and a couple of TF330 Rev3 PCBs if there are any left? I can't currently PM here, perhaps some of you kind mods could make that happen?
Cheers.
Cheers.
-
theq
- Posts: 114
- Joined: 18 Dec 2018 19:16
- Location: North of the Wall
Re: Latest TF534 is here
Somehow I can’t seem to PM you either, but I’d love to buy 1 PCB :)
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
Re: Latest TF534 is here
TF, I'll take two.terriblefire wrote: 28 Feb 2019 16:46 Ok I have 49 of the TF534s left. I prefer to sell them direct rather than via ebay. Contact me if you want some.
Who is online
Users browsing this forum: ClaudeBot and 2 guests