Introduction

[STE newbie1040]

Hi everyone,

I had an Atari ST back in the day and absolutely loved it. Sadly, it was eventually replaced by an Amiga. Although I grew to love the Amiga as well, I always felt that the ST had a bit more personality.

Now, I’ve finally had the opportunity to get another one, and I’ve actually ended up buying a few Ataris! I’m really enjoying getting back into the ST world and have decided to upgrade the STE, while keeping the ST as it is.

I’ve ordered a 4MB memory kit, PSU caps and a TOS upgrade. Unfortunately, one of the TOS chips had a leg break off when I pulled it out of the foam packaging.

Could anyone point me in the right direction for getting a replacement, please?

Many thanks
Carl

[exxos]

Assuming you purchased from my store can you message me your order number and a image of the problem I will take a look from there.

[STE newbie1040]

Hi,
thank you for the quick reply, please see info below.

the recap went very well, and ram upgrade is working great.

YOUR ORDER IS LISTED BELOW.

--------------------------------------------------------------------------
PURCHASED ITEM: ATARI PSU REPAIR KIT MITSUMI SR98 240V
REQUESTED QTY: 1
QTY IN STOCK: 22
STOCK AVAILABLE
Price for items = £17


--------------------------------------------------------------------------
PURCHASED ITEM: NEW 4MB (4x1MB) RAM 30 pin simms for Atari STE
REQUESTED QTY: 1
QTY IN STOCK: 8
STOCK AVAILABLE
Price for items = £38


--------------------------------------------------------------------------
PURCHASED ITEM: ATARI STE TOS 2.06 ENGLISH 2 CHIP SET
REQUESTED QTY: 1
QTY IN STOCK: 8
STOCK AVAILABLE
Price for items = £12


============================================
Different items ordered: 3
Total cost (ex postage) = £67
Postage = £7.80
Transaction fee = £2.67
Grand Total = £77.47

YOUR ORDER NUMBER IS:
EXD2189321D47FC4BBF765509DEF02A4

Atari TOS.jpg (129.87 KiB) Viewed 73 times

[stephen_usher]

[JezC]

Welcome to the forum!

[STE newbie1040]

Assuming you purchased from my store can you message me your order number and a image of the problem I will take a look from there.

Hi Exxos, please see above posts with image with the broken pin also order number, please let me know what to do next.

many thanks
Carl

[exxos]

Hi Exxos, please see above posts with image with the broken pin also order number, please let me know what to do next.

Sorry I forgot to reply. A new set is on its way to you. Sorry for the problem. I've been chucking lots of eproms away recently as the pins were bad. They getting hard to find these days

[rubber_jonnie]

[alexh]