Newcomer arriving soon...

[HigashiJun]

Ok, so after @Steve 's wise advice, here is the new PSU:

PSU1.JPG (473.21 KiB) Viewed 1080 times

PSU2.JPG (360.75 KiB) Viewed 1080 times

Now have to test it before fitting it back in the TT...

[rubber_jonnie]

This is going to be a glorious TT by the time you're done

[HigashiJun]

I hope so !

[jwd]

Yay, the new PSU has just been delivered:


PSU1.JPG


PSU2.JPG


Here are its specs:


Specs.jpg


Still hesitating though whether to replace the recapped Phihong one...

Good specs.

Where is that sold?

[Steve]

Good specs.

Where is that sold?

https://www.16-32bit.eu/mste-tt-psu

[HigashiJun]

And here comes today's progress:

1.JPG (537.42 KiB) Viewed 1014 times

A heatsink is fitted to the FPU (now running at 48MHz) and I also plan to install a heatsink/fan on the CPU.

2.JPG (324.65 KiB) Viewed 1014 times

Also soldered pins to the ATW800/2 USB IN port so I can have my USB ports at the back of the machine.

3.JPG (471.58 KiB) Viewed 1014 times

A nice result...

4.JPG (301.29 KiB) Viewed 1014 times

I had to trim the USB connector though.

5.JPG (286.75 KiB) Viewed 1014 times

Here's what it looks with the VME cradle in. The FPU heatsink sits below the ATW800/2 card and the USB connector doesn't interfere with anything.

6.JPG (212.31 KiB) Viewed 1014 times

And the back of the TT with the AT800/2 and its titanium made backplate.


That's all for today !

[rubber_jonnie]

Where are the ATW800/2 boards available from out of curiosity?

[HigashiJun]

@rubber_jonnie

You can get one here:

https://www.geekdot.com/buy-an-atw800-2/

I am on the list for a second one...

[rubber_jonnie]

@rubber_jonnie

You can get one here:

https://www.geekdot.com/buy-an-atw800-2/

I am on the list for a second one...

Thanks.

[HigashiJun]