REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
sandord wrote: 10 Nov 2018 14:56
I didn't want to cover the board title (it'd read "TF Remake" otherwise) so I decided to stretch the switch legs and solder it on the board directly.
Actually, that worked just fine :D I made sure there was enough solder flowing through the holes because the legs didn't stick through far enough.
IMG_20181110_155032.jpg
Nice mounting, I was more concerned with functionality and speed of implementation. I pretty much knew that board was not going to fit in a standard Atari case and would a need something custom and unique. :mrgreen: :mrgreen: :mrgreen:
The board has so many daughter cards/un-f*ck cards I thing it going to need some zoning laws to limit the stack height of daughter card stacks in the more critical areas of the board... :-P :-P :-P
Yes very elegant solution sandord
I agree with PaulJ its becoming a bit daughter-board-tastic. Here it is with all the boards in place so far.
IMG_3255.png
You do not have the required permissions to view the files attached to this post.
Icky wrote: 10 Nov 2018 15:44
I agree with PaulJ its becoming a bit daughter-board-tastic. Here it is with all the boards in place so far.
IMG_3255.png
:shock: My PCB order is still in the mail, so things will start to look very differently once I'll be building them up. The STF Remake is going Manhattan style ;)
Icky wrote: 10 Nov 2018 15:44
I agree with PaulJ its becoming a bit daughter-board-tastic. Here it is with all the boards in place so far.
IMG_3255.png
:shock: My PCB order is still in the mail, so things will start to look very differently once I'll be building them up. The STF Remake is going Manhattan style ;)
There is also the video board with the Falcon DAC that Exxos is working on too. That will be in front of those Un-f*ck boards in the pic.
Its almost like that whole mid section of the board is going to be one big daughterboard.
Ya, I can't wait for a board with all the changes incorporated and will fit in an 1040 case. I can't keep building these custom box cases!
:yay2: :cheer: :yay2: :cheer: :yay2:
Nice mounting, I was more concerned with functionality and speed of implementation. I pretty much knew that board was not going to fit in a standard Atari case and would a need something custom and unique. :mrgreen: :mrgreen: :mrgreen:
The board has so many daughter cards/un-f*ck cards I thing it going to need some zoning laws to limit the stack height of daughter card stacks in the more critical areas of the board... :-P :-P :-P
Yes very elegant solution sandord
I agree with PaulJ its becoming a bit daughter-board-tastic. Here it is with all the boards in place so far.
IMG_3255.png
I'm using the ultra satan 19 pin plug which is vertical in relation to the 19 pin board connector. Is the 1772 daughter card stretching beyond the connector to interfere with the ultra satan plug in connector?
